Pulsating vacuum pressure steam sterilizer is a medical device that extracts vacuum and fills steam into the sterilization chamber alternately for many times (fill saturated steam after the sterilization chamber reaches a certain vacuum degree), and finally reach the set pressure and temperature, so as to realize the sterilization of high temperature and humidity resistant articles. It is used for damp heat sterilization of medical instruments and surgical instruments and drying treatment after
2022
05
17
Shipping is gradually recovering, and we have ushered in the peak of shipments
The Suzhou area was finally lifted this week after a period of lockdown.
The Suzhou area was finally lifted this week after a period of lockdown.
2022
05
17
What is a laminar flow hood used for?
The clean laminar flow hood is an air purification unit that can provide a local high clean environment. It can be flexibly installed above the process points that require high cleanliness. The clean laminar flow hood can be used alone or combined into a strip-shaped clean area.
The clean laminar flow hood is an air purification unit that can provide a local high clean environment. It can be flexibly installed above the process points that require high cleanliness. The clean laminar flow hood can be used alone or combined into a strip-shaped clean area.
2022
05
17
Detection of indoor airflow pattern
1. Layout of measuring points:
The vertical unidirectional flow (laminar flow) clean room shall have one longitudinal section and one transverse section respectively
1. Layout of measuring points:
The vertical unidirectional flow (laminar flow) clean room shall have one longitudinal section and one transverse section respectively
2022
05
17
1、 Filter leak detection
For the high-efficiency filter installed at the end of air supply and exhaust, the scanning method shall be used for filter installation frame and full section leakage detection. There are two scanning methods: leak detector method (photometer method) and particle counter method with a minimum sampling amount of 1l / min. For ultra-high efficiency filter, there are two scanning methods: condensation nodule counter method and laser particle counter method.
For the high-efficiency filter installed at the end of air supply and exhaust, the scanning method shall be used for filter installation frame and full section leakage detection. There are two scanning methods: leak detector method (photometer method) and particle counter method with a minimum sampling amount of 1l / min. For ultra-high efficiency filter, there are two scanning methods: condensation nodule counter method and laser particle counter method.
2022
05
17
1. Jacking
Fault condition:
After the upper punch enters the middle die, the machine stops running
Cause of failure:
Fault condition:
After the upper punch enters the middle die, the machine stops running
Cause of failure:
2022
05
17
2. machine not running well
Fault condition:
Generally, it doesn't work well
Cause of failure:
Fault condition:
Generally, it doesn't work well
Cause of failure:
2022
05
17
Clean room color steel plate, which we usually call purification plate or clean plate, is a composite plate formed by the combination of color steel plate as surface material and rock wool
2022
05
17
The air enters the clean room from the air-conditioning box through the air duct and the air filter (HEPA) in the clean room, and is returned by the partition wall panels or raised floors on both sides of the clean room. The airflow is in a state of irregular turbulence or eddy current due to non-linear motion. This type is suitable for clean room class 1,000-100,000.
2022
05
17
The airflow in the clean room is an important factor affecting the performance of the clean room. Generally, the airflow speed of the clean room is between 0.25~0.5m/s. This airflow speed belongs to the breeze area and is easily disturbed by the actions of people and machines. . Although increasing the wind speed can suppress the influence of this disturbance and maintain cleanliness, the increase in wind speed will affect the increase in operating costs, so when the required cleanliness level i
2022
05
17
Since the outbreak of the new crown epidemic on December 20, 2019, many enterprises, units, production frames, engineering, factories and other related units have been more or less affected by the epidemic, traffic is blocked, raw materials cannot be purchased, cannot be delivered, and the production is good Products cannot be delivered to customers within the specified time. Various reasons affect everyone.
2022
05
17
Biological safety cabinet is a safety equipment widely used in scientific research, teaching, clinical inspection and production in the fields of microbiology, biomedicine, genetic recombination, animal experiments, biological products, etc. The most basic safety protection equipment.
2022
05
17
no data
Contact Us
Telephone: +86-18241958031/
+86-18913598640
Fax: 86-512-65488640
Email: pharma@sz-pharma.com
Whatsapp/Wechat: 008618241958031
Notice:
We hereby declare that our company's only legal contact is through the the above email, Any other similar suffix is a scammer email.
Address: NO.188 xiangwei road, near junction of xiangwei road and chengyang road (the second floor of south building inside of haiji feiyue) Xiangcheng district, Suzhou city, Jiangsu province, China
no data
Copyright © 2025 Suzhou Pharma Machinery Co., Ltd. | Privacy Policy Sitemap