Key description of control panel of air shower room:

1. Emergency stop button: press the emergency stop button at any time, the red emergency stop indicator light will be on, and the system will automatically reset after 1 minute. Press and hold the emergency stop button for 5 seconds, and release the system to keep the emergency stop state and automatically disconnect all outputs except for lighting. When you press the emergency stop button again, the system will return to the initial state. This button is mainly used when the internal and external doors cannot be unlocked, the air shower cannot be automatically closed, and other maintenance is required.

2. Air shower button: after the inner and outer doors are closed, press the manual button, and the system will turn to air shower process. This button is mainly used for door magnet, infrared failure or fan maintenance.

3. Lighting button: Use the "lighting" button to turn on and off the indoor lighting lamp in the air shower. This button is mainly used for door magnetic failure or lamp maintenance.

4. Up and down buttons: Before or after the wind shower starts, press and hold the up and down buttons to adjust the delay time of wind shower; Adjust or select when entering the internal parameter setting.

Display description of air shower indicator and digital tube:

1. Air shower countdown display: double digit red digital tube display, used to display air shower time during operation

Set value and remaining time of air shower are used for menu parameter display when setting menu.

2. External door lamp: when the external door is opened, this lamp is on (it can be checked whether the external door magnetism is normal).

3. Induction lamp: when the human body enters the induction area, this lamp is on (you can check whether the photoelectric switch is normal).

4. Inner door lamp: when the inner door is opened, this lamp will be on (it can be checked whether the inner door magnet is normal).

5. Air shower lamp: when this lamp is on, it indicates that the air shower fan has been started automatically or manually.

6. Emergency stop lamp: when this lamp is on, it indicates that the system is in emergency stop state.

Suzhou Pharma Machinery Co.,Ltd.

2022/12/11

Birkey