We have an old clients who are in Toshkent, who bought our clean room at 2013 year, and about 2017 year, they request we go for installation. As we know some clean room materials such as panels, electric wire and basic materials will be off life time if more than 2 years. Even the surface film of the panels can not be take off after two years later. So we worried so much, but so surprise to us, when we arrived at their factory, we see all of our materials especially the panels are all good as ne
2020
12
31
Customer want to extract essential oil for health food use, and by understanding, they can confirm that supercritical equipment is their best solution. So I want to customize a device.
2020
12
02
Product need working under a clean condition, which requires the product to have a air filter system. This requires that the equipment must have a hepa filter. At the same time, we make the clean bench positive pressure and no leakage after long-term use, so as to ensure the products and operation. The safety of the working environment, and with high-efficiency non partition filter to achieve the cleaning effect.
High strength stainless steel plate with thickness of 2.0 mm is used to ensure sta
High strength stainless steel plate with thickness of 2.0 mm is used to ensure sta
2020
12
02
One Saturday morning, an inquiry was received and a quotation was quickly made after the inquiry to determine the room size, layout and cleanliness. Customer require a small air-conditioning system with air circulation, an iso7 small clean room with return air duct, equipped with air shower room and transfer window, which is used in the packaging workshop for planting denture, with high cleanliness requirements. Later customer also purchased stainless steel products, wardrobe, shoe cabinet, tabl
2020
10
28
At the beginning of the project, it was just a small clean room with double door interlock device. After confirming the room size, layout and cleanliness, we made a preliminary offer. I have been following up for half a year, but haven't feedback. Then I have a new drawing, which is much bigger than before. One is breeding laboratory, the other is drying, extraction, packaging workshop. After the final quotation, the transaction was completed through the order of Alibaba. Later, they also purcha
2020
10
28
How to improve the efficiency of staff entering clean room? Our client want to transform their workshop to produce drugs, and the laboratory is a clean area. Due to the large number of employees and the limited location of the entrance, we recommend two sets three person air shower rooms, which are installed on both sides, so as to ensure that six people can pass at one time, which greatly improves the efficiency and saves a lot of time.
2020
10
21
Our client need to change a modular clean room for 12 square meter local production. However, their cost is limited, and they want to observe the internal production situation completely. Therefore, the standard plate type clean shed will not be suitable for them. Therefore, we recommend using PVC transparent material for them. It is not only less cost, but also can fully meet their requirements. We spent a week to discuss the details, and finally the customer was very satisfied with the plan.
2020
10
21
There are some Chinese machinery factory instruction book is very bad, especially the sachet packing machine factory, in 2011 year, we have one clean room project in Mongolia, and when we finished our clean room, the clients also bought some sachet packing machine from other Chinese factory, but they do not send engineer to install and testing for them, only give them one instruction book, so client need our help, we try to test the machine, when we read the book, we found this is misunderstandi
2020
10
09
As we know the clean room construction is very important, but some misunderstanding or wrong communication will cause the actual condition changed during installation, now I will show a clean room project issue during installation.
2020
09
25
In February of 2019,We received the inquiry from one customer from United States。
He is interested in customized clean room for ethanol extraction.
So we help him designed one project with 4 rooms.Every room with one working step.
So each room attend to each room 's own duties,this can reduce the possible for them be polluted.
He is interested in customized clean room for ethanol extraction.
So we help him designed one project with 4 rooms.Every room with one working step.
So each room attend to each room 's own duties,this can reduce the possible for them be polluted.
2020
09
22
On the online live show, our main promotion is that the most distinctive modular clean room. The friends who have not seen the previous several live, please do not worry, this time I will review with you a few wonderful live.
2020
08
14
The live broadcast of the Purchasing Festival began in August, and Suzhou Pharma Machinery Limited Company started relevant preparations. Although the live broadcast is still going on, you can also find the perfect effect of the previous live broadcast. All of this goes hand in hand with the Suzhou Pharma Machinery team's efforts.
2020
08
14
no data
Contact Us
Telephone: +86-18241958031/
+86-18913598640
Fax: 86-512-65488640
Email: pharma@sz-pharma.com
Whatsapp/Wechat: 008618241958031
Notice:
We hereby declare that our company's only legal contact is through the the above email, Any other similar suffix is a scammer email.
Address: NO.188 xiangwei road, near junction of xiangwei road and chengyang road (the second floor of south building inside of haiji feiyue) Xiangcheng district, Suzhou city, Jiangsu province, China
no data
Copyright © 2025 Suzhou Pharma Machinery Co., Ltd. | Privacy Policy Sitemap