FAQ Precautions For Installation Of FFU High-Efficiency Filter In Class 100 Clean Room

1. Before the installation of the high-efficiency filter, the appearance of the filter must be checked, including whether the filter paper, sealing gasket and frame are damaged, whether the size and technical performance meet the design requirements, and whether the appearance or filter paper is seriously damaged, the installation shall be prohibited, and the photos shall be taken and reported to the manufacturer for treatment.

2. Only hold the filter frame and handle it gently during installation. To prevent violent vibration and collision, it is strictly forbidden for the installation personnel to touch the filter paper inside the filter with their fingers or other tools.

3. When installing the filter, pay attention to the direction so that the arrow on the filter frame is outward, that is, the arrow on the outer frame should be consistent with the airflow direction.

4. Do not step on the filter protection net during installation, and do not throw sundries on the filter surface. Do not step on the filter protective net.

5. Other installation precautions: wear gloves and pay attention to cutting fingers on the box. The FFU installation should be aligned with the filter, the edge of the FFU box should not be pressed on the filter, and it is prohibited to cover items on the FFU; Do not step on the FFU inlet coil.

Suzhou Pharma Machinery Co.,Ltd.

2023/01/02

Birkey