FAQ - Cleaning Methods For Cleanroom Lamps And Wall Panels

Lamp cleaning

1. The cleaners bring cleaning tools such as stairs, cleaning vehicles, and wipes into the cleaning and cleaning places;

2. After turning off the power, put the stairs under the lamp, and the cleaners stand on the stairs. When wiping, follow the order from the top of the lampshade - the protective layer of the lampshade - the lampshade fixing frame, and then wipe with a dry cloth.

3. After cleaning the cleaning utensils in the cleaning room, the cleaners store them in the final fixed position.

4. Lamps in clean areas should be cleaned once a month; lamps in general production areas should be cleaned quarterly; or once buried, they should be cleaned immediately.

5. After the operation is completed, fill in the relevant records.

wall cleaning

1 Wipe the wall with a damp cloth first. If there is any stain that is not easy to wipe off, wipe it with 75% ethanol or detergent.

2 Use a pressure-type mop to dip the cleaning solution, wipe the walls from top to bottom and from left to right, first in the room and then in the corridor.

3 After the cleaning utensils are used, they must be cleaned in time and stored in the sanitary ware room after washing.

4 The walls must be disinfected regularly, and the operation method is the same as above.

5 Commonly used detergents are dishwashing liquid, 75% ethanol; commonly used disinfectants are 0.1% new cleanser, 0.1% 84 disinfectant and so on.

6 Walls are generally cleaned once a week, or wiped after burial, and disinfection is generally once every half month.

7 After the operation is completed, fill in the relevant records.

Suzhou Pharma Machinery Co.,Ltd.

2022/05/04

Birkey