There are three sets air showers export to Germany, the air showers types all customized design and materials SS304.
In addition to these, the opening direction of the air shower room is also customized according to the drawings.
If you also need any air shower, please check the following product details and choose the suitable type!
Product Details:
Electric voltage:220V, 280V, 460V or 480V when ordering
Material: Powder-Coated Steel, Stainless Steel(SUS304)
Width: 1250mm,1300 mm, 1778 mm, 2286 mm or customized
Depth: 1500mm, 1829 mm, 2000 mm or customized
Height: 2150mm,3048 mm or customized
Number of Nozzles Blowers: 12 Blower, 24 Blowers or customized
Shower type:single person, double person, multi person or cargo shower
Door open side: L shape, straight, automatic door…
Product advantages:
Removes surface-deposited particles from personnel prior to entering the cleanroom
HEPA-filtered air (rated 99.99% efficient at 0.3 microns) washes over personnel to dislodge loose particles that accumulate on garments
Electromagnetic interlock system prevents the doors from opening before the air shower cycle is completed, protecting the cleanroom from cross-contamination
Door locks automatically release in the event of a power outage or if one of the Emergency Exit buttons are depressed
Shower time and door interlock duration can be programmed using the touchscreen control panel
Air nozzles can be adjusted to redirect streams of air
Energy-efficient LED lighting includes motion-activation
Electromagnetic Interlock
Electromagnetic interlocking doors prevent personnel from accidentally opening both air shower doors at the same time, thereby preventing cross-contamination of the cleanroom and the external environment.
Control Panel
The touchscreen panel controls cycle durations and entrance/exit delay times. Users can adjust these settings, as well as choose the operating mode for the LED lighting: always on; always off; or motion-detecting mode with shutoff-delay.
Adjustable Air Shower Nozzles
Adjustable air nozzles on the walls and ceilings provide multi-directional flow of high-velocity, HEPA-filtered air to dislodge and remove particles from surfaces of personnel and parts before they enter the cleanroom.
Recirculation Vents
The closed-loop, recirculating design uses floor-level vents and plenums built into the walls to pull the contaminated air back through the HEPA filter, which removes 99.99% of particles as small as 0.3.
Suzhou Pharma Machinery Co., Ltd
2021/7/25