After you’ve dedicated your time and resources to fill your cleanroom with the best equipment and the most professional team, you want to make sure to maintain an exceptionally clean environment so that your cleanroom can function at peak performance. All cleanrooms require continual maintenance to be able to operate their best. Cleanrooms should be cleaned according to a regular schedule, and meeting daily and weekly tasks. So how to clean your cleanroom wall panels?

It is principal to choosing the right cleanroom cleaning products.

There is a variety of different classifications and purposes that can dictate the correct methods and materials used to properly sanitize a cleanroom. All cleanrooms require review of the cleaning chemicals that will be used in the disinfecting process to ensure they will perform adequately. For higher grade cleanrooms (ISO 14644 classes 5 through 7) for example, sterile disinfectants are required.

The best cleaning products for a cleanroom must meet these requirement:

• Non-ionic and chemically neutral

• Satisfy GMP regulations

• Non-foaming

                

                 

Non-ionic and chemically neutral disinfectants and cleaners won’t interfere with an environment that may need a certain chemical composition or makeup for production, experiments or testing. If pharmaceutical products are being produced, Good Manufacturing Practice (GMP) regulations must be met by cleaning chemicals and disinfectants.

It’s also worth considering electrostatic spray disinfection for cleanroom and R&D facilities, as electrostatic spray disinfection is a nonabrasive cleaning procedure that will maintain the controlled environment of the room. By using charged particles that evenly coat every surface, electrostatic spray disinfection is able to clean and disinfect nearly every surface in an R&D Facility or cleanroom.

It’s time to the wall cleaning methods. Firstly, when you clean the cleanroom wall, remember mop it from top to bottom, focus on the cleanest area (top) firstly to the dirtiest area (bottom). Then use straight linear strokes. Last but not least overlap paths to make sure no surface area is missed.

Suzhou Pharma Machinery Co.,Ltd.

2023/07/24

Spencer