The core component of the rotary dehumidifier is a honeycomb adsorption turntable, which is composed of a special ceramic fiber carrier and active silica gel; the two sides of the turntable are divided into two areas by a special sealing device: the treatment area and the regeneration area; Rotate slowly at a speed of 8-10 rpm to ensure that the entire dehumidification is a continuous process. When the humid air that needs to be dehumidified is collected into the treatment area of the runner, the water vapor of the humid air is adsorbed by the active silica gel of the runner, and the dry air is sent to the room by the treatment fan; while the continuously slowly rotating runner is loaded with load and tends to be saturated The water vapor enters the regeneration area; the high-temperature air (usually 100-140 ℃) blown in the reverse direction in the regeneration area causes the water adsorbed in the runner to be evaporated and desorbed, and discharged to the outside by the fan, so that the runner restores moisture absorption The ability to complete the regeneration process, the runner is constantly rotating, the above-mentioned dehumidification and regeneration are carried out over and over again, so as to ensure the continuous and stable dehumidification state of the dehumidifier.

The combination of freezing dehumidification and rotor deep dehumidification, and through the control of the outlet air temperature, achieves the effect of normal temperature and low humidity. After the treated air is cooled and dehumidified through the front surface cooling section, it enters the runner unit for deep-level fine dehumidification to achieve a low-humidity effect.

Suzhou Pharma Machinery Co.,Ltd.

2022/06/19

Birkey