Common Faults Of Single Tablet Press Machine -4

Common Faults Of Single Tablet Press Machine - Wear

4. Wear

A) Fault condition:

The friction surface between the spindle and the hole is rapidly worn and even burned out

Cause of failure:

Lack of oil and impurities

Fault prevention and treatment:

Always keep clean and lubricated, and the lubricating oil used must be clean and free of impurities

B) Fault condition:

The axle shaft and sleeve wear rapidly

Cause of failure:

Lack of oil and impurities

Fault prevention and treatment:

Always keep clean and lubricated, and the lubricating oil used must be clean and free of impurities

C) Fault condition:

The upper punch rod and sleeve wear rapidly

Cause of failure:

Lack of oil and impurities

Fault prevention and treatment:

Always keep clean and lubricated, and the lubricating oil used must be clean and free of impurities

D) Fault condition:

The lifting cam groove is worn rapidly

Cause of failure:

In addition to the above reasons, there are: (1) improper batching and granulation, or the surface of the die is not smooth, resulting in die sticking, which causes rapid wear due to the thin sheet resistance and the load of the lifting cam groove; (2) the lifting roller cannot rotate due to too tight fit or rust.

Fault prevention and treatment:

(1) check the die. If there is die sticking, repair the die or re batching and granulation according to the situation. (2) remove and repair

E) Fault condition:

Rapid wear of die surface

Cause of failure:

(1) improper adjustment, friction between the upper punch and the die; (2) improper batching and granulation, such as too little sliding material, too thick powder, etc.

Fault prevention and treatment:

(1)adjust separately (2) reprocess the medicine

Suzhou Pharma Machinery Co., Ltd a manufacturer integrating design, production and installation, introduces advanced production lines, and can design and produce according to customer requirements. Make products with the spirit of craftsmanship of excellence.The product quality is guaranteed and the service is perfect. The manufacturer's direct sales saves you intermediate costs.we can provide you with a full set of pharmaceutical production lines and clean room construction, and provide you with one-stop service. It is your trusted partner. Welcome to cooperate with Suzhou Pharma machinery for win-win!

                 

                 

                 

Suzhou Pharma Machinery Co.,Ltd.

2022/05/01

Mia