Common Faults Of Single Tablet Press Machine -Vibration
During the operation of the tablet press, there will inevitably be some small accidents, and vibration is one of them. Today, we will introduce the common faults of the tablet press in the use of the machine vibration problem, and how to solve it when you encounter such a problem
3. Vibration
Fault condition:
Abnormal vibration
Cause of failure:
(1) loose parts and screws
(2) serious wear of parts
(3) the friction surface is dry, lack of oil or dirt
Fault prevention and treatment:
(1) check frequently. Before each shift, check whether each screw is loose. Pay attention to the inspection frequently during the working process. If it is loose, tighten it immediately to avoid failure. Its main parts are: upper punch fastening nut, middle die fixing screw and lower punch fixing screw; Connecting rod lock nut, connecting rod pin and set screw; Lifting fork lock nut (2) butterfly screw; Set screws of middle formwork platform plate (2 pieces).
(2) check frequently and repair and replace worn parts in time.
(3) always pay attention to the cleaning and lubrication of each friction surface, especially the friction surface of the main shaft and eccentric wheel that cannot be seen directly, but the working load is the most important.
Suzhou Pharma Machinery Co., Ltd a manufacturer integrating design, production and installation, introduces advanced production lines, and can design and produce according to customer requirements. Make products with the spirit of craftsmanship of excellence.The product quality is guaranteed and the service is perfect. The manufacturer's direct sales saves you intermediate costs.we can provide you with a full set of pharmaceutical production lines and clean room construction, and provide you with one-stop service. It is your trusted partner. Welcome to cooperate with Suzhou Pharma machinery for win-win!
Suzhou Pharma Machinery Co.,Ltd.
2022/05/01
Mia
