News

Home  > INFO CENTER  > BLOG  > 

Capsule Counting Machine Tested and Maintenance

Capsule Counting Machine Tested and Maintenance

2022-10-08



This week we mainly tell about how to operate and maintain the capsule counting machine.

When changing different drug granules in each sub packaging, or at the end of the day, the appearance of the machine and the parts in contact with the drugs must be wiped clean.


(1) The parts and components in contact with drugs must be disassembled and thoroughly cleaned. The parts are disassembled in sequence as follows. The name of the parts refers to the drawing of each part:

1. Filling barrel and upper cover

2. Flow baffle

3. Vibration groove

4. Powder collecting box

5. Tracker

6. Round frame

7. Glass turntable

8. Trapezoidal acrylic cover

9. Stainless steel filling funnel

10. Acrylic dust collector

11. Y-type positioner

12. Remove all screws

Tools are not required for the removal of all the above parts. The removed parts shall be wiped clean with clean water and rags, then the compressed air or rags shall be used to wipe the moisture, and then the stainless steel parts can be dried naturally. The stainless steel parts can be dried quickly with hot air or oven, but the acrylic products and glass turntables can never be dried at high temperature to prevent deformation.


(2) Wipe the rest of the machine body with a rag, and then wipe it again with alcohol.


(3) Pull the door panel from the right side, clean the inner wall of the electric eye head, the flow channel, the blade, the infrared LED beads, and the powder on the electric eye glass lens with a rag and a brush.


(4) The fixed seat of the electromagnetic solenoid shall be blown with compressed air. A drop of edible oil shall be applied to the connecting part between the pull rod center and the blade shaft rod to increase lubrication. The speed can be increased when the pull rod moves left and right.


(5) When the parts are reassembled, they need to be wiped again with alcohol. When the glass turntable is installed, it must be identified that it is directly above and below. If there is a stainless steel gasket below, the tenon hole must be inserted into the tenon, otherwise the glass turntable will break when the upper circular frame is installed.


(6) Machine location:


(1) When placed indoors, it shall be kept away from direct sunlight, windows and projection lamps, and there shall be no radiation equipment around.

(2) The working table should be horizontal, and the four feet should be stable to avoid vibration. When the machine is placed on the working table, the feet should be properly rotated to make it stable. If the machine is moved, it must be readjusted.

(3) The indoor temperature should be normal to avoid heavy humidity. If it is not a dust-free room, it should be covered with a cover at ordinary times.

(4) The power socket shall have a load of 220V and above 5A and be equipped with a grounding jack.



news-Capsule Counting Machine Tested and Maintenance-PHARMA-img                 
news-PHARMA-img                 
news-PHARMA-Capsule Counting Machine Tested and Maintenance-img                 
news-Capsule Counting Machine Tested and Maintenance-PHARMA-img-1                 
news-PHARMA-img-1                 

Suzhou Pharma Machinery Co.,Ltd.

2022/10/08

David


Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: