loading

Focus on professional factory cleanroom workshop project and machinery only                          Phone: +86 18241958031    Email: pharma@sz-pharma.com          

product-PHARMA-img
Home  > PRODUCT  > Pharmaceutical Machinery  > Punch And Die  > 

TDP Die Punch And Die Manufacturers

TDP Die Punch And Die Manufacturers

TDP Die Punch And Die Manufacturers

Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Shop Activities
Product Description
Tablet press die can be engraved die Engraving punch is an important part of the tablet press, also known as the tablet press die in the industry. A pair of tablet press molds are divided into three parts: upper punch die, middle punch die and lower punch die. The punching dies we produce are round, special, rotary, single, etc., and each process of material, heat treatment, grinding, polishing, etc. contains many years of technical experience. Especially in terms of material selection, imported steel is especially selected to improve the quality of the mold. In terms of technical specifications, we always adhere to manufacturing standards. The tablet press mold is assembled on the tablet press and is suitable for compressing Chinese and Western medicine tablets, nutrient tablets, lozenges, spirulina tablets, milk tablets, vitamin C effervescent tablets, effervescent tablets, seasoning blocks, mothballs (hygienic balls), Aromatic balls, disinfection tablets, fertilizer tablets, bath salt balls, button batteries, electronic components, metallurgical powder ceramic particlesThis set will fit a range of TDP type including the new TDP 0, TDP 1.5, TDP 5, TDP 6s. All sets come complete with a centre ring die specific to your machine. Please select your size below. You can also purchase this design in any other shape or size and for many other machines. Get in touch to discuss your ideas!
Material
Gcr15
Model
ZP TDP
Design
Round
Square
Irregular
Prepare time
20-40 working days
Die size
custom
product-PHARMA-img
Features:
1. It is made of carbon steel, bearing steel and chrome 12
2. Digital machining center precision manufacturing, in line with IPT standards
3. Corrosion resistance, impact resistance, wear resistance, high temperature resistance and long service life
4. Interchangeability 100% (no matter round or special mold)
Detail Show
product-PHARMA-img
product-PHARMA-img
product-PHARMA-img-1
product-PHARMA-img-1
product-PHARMA-img-1
Tablets are a common dosage form in medicinal preparations because of their convenience to take, and the die is an indispensable accessory on the tablet press of commonly used tablet equipment. It is also a very important task to correctly select the appropriate die after the tablet press is purchased. In daily life, many tablet pharmaceutical factories cannot use the tablet press normally due to improper die selection. In order to enable the users of the pharmaceutical factory to better order the appropriate die, this article will introduce some details. At the same time, it is recommended that the user of the pharmaceutical factory should have a full discussion with the die manufacturer first to reduce possible problems during production. Due to the characteristics of track design and processing technology, it is recommended that users must purchase products from the same factory for tablet press and die, and do not frequently change mold manufacturers, but choose factories with strong strength and good processing accuracy. Don't blindly pursue cheap and buy inferior dies, which will eventually damage the tablet press. Selection of tablet type: The correct selection of tablet type is the first step to the success of a tablet die. For example, chewable tablets require high hardness and are easy to chew. Most of them use bevel-edged flat tablets; those that require film coating can choose shallow-concave tablets. Because there are no binders and lubricants in the raw materials of Chinese tablets, it requires high pressure when compressing tablets, and the tablet shape is preferably shallow. For tablets with high sugar content, the design of the tablet shape is preferably shallow or flat. The middle mold can use alloy steel or hard alloy. The deep-concave sheet die is easy to damage, so use it as little as possible.
product-PHARMA-img-2
Mold maintenance:
The main contents are cleaning, lubrication and inspection. A. Maintenance during mold installation: 1. The upper and lower surfaces of the mold should be cleaned before installing the mold to ensure that the mold mounting surface and the working table of the press will not be compressed and damage the parallelism of the upper and lower mounting surfaces of the mold in production; 2. After the mold is installed, open the mold and clean all parts of the mold, especially the guide mechanism. For the surface part of the mold, its surface should be cleaned to ensure the quality of the parts;
B. Maintenance in production: 1. Oil the corresponding parts of the mould regularly during production. Such as: the pressing ring
and fillet of the drawing die; the knife edge of the trimming die; the flanging knife block, etc; 2. Clean up the small hole waste
channel of trimming and punching die regularly. C. Maintenance after production: 1. After the end of production, the mold should
be checked comprehensively; 2. Clean the mold completely to ensure the cleanliness of the mold; 3. Clean up the waste in the mould
to ensure that there is no waste in the waste box; 4. If it is used for a long time, spray antirust oil after cleaning. If it is
not used for a long time, put it in diesel after cleaning
Design Chart
product-PHARMA-img-2
product-PHARMA-img-2
product-PHARMA-img-3
product-PHARMA-img-3
product-PHARMA-img-3
product-PHARMA-img-4
Product Effect
product-PHARMA-img-4
Packaging & Shipping
product-PHARMA-img-4
Related Products
product-PHARMA-img-5
TDP single punch tablet press machine in stock
This machine is designed for pressing round tablets from various granular materials, applicable to be used for research and
development and to small scale production. As its feature, it is an all desk-top continuous press driven by motor or man power.
Only one set of punch and die is mounted. The depth of the filling material and the thickness of the tablets can be adjusted.
zp12 rotary tablet press machine
New type rotary tablet press gives you better quality and price, automatic tablet press for pressing granular raw materials into.
This machine is a single press type, continuous automatic tablet press for pressing granular raw materials into tablets. It is
mainly used in pharmaceutical industry and also the chemical, food, electronic, plastic and metallurgical industries.
product-PHARMA-img-5
product-PHARMA-img-5
Tdp Tablet press punch die set
This mold could be used in Manual tablet press machine,TDP-0,TDP-1.5,TDP-5,TDP-6;Rotary tablet press (ZP-5.ZP-7 ZP-9 ZP-10 ZP-12
ZP-15 ZP-19 ZP-23 ZP-29 ZP-33 Etc
Tablet press punches, die, tablet press tooling and tablet press mould
8mm pill press punch die
This mold could be used in Manual tablet press machine,TDP-0,TDP-1.5,TDP-5,TDP-6;Rotary tablet press (ZP-5.ZP-7 ZP-9 ZP-10 ZP-12
ZP-15 ZP-19 ZP-23 ZP-29 ZP-33 Etc

We apply the newest CAD/CAM technology and advanced heat treatment technology and scientific measuring means to machine various
kinds of punch and die with high grade bearing steel for tool..
product-PHARMA-img-6
Company Information
product-PHARMA-img-6
Strictly control the quality of Clean Room is a indispensable step during its production. SUZHOU PHARMA MACHINERY CO.,LTD. is all about comfort, service and meeting individual needs.
SUZHOU PHARMA MACHINERY CO.,LTD. is committed to providing the highest level of service for you. Our friendly and customer-focused employees are always pleased to help you with any questions you might have.
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: