Talking about the Application and Operation of Electric Powder Tablet Press

Electric powder tablet press machine is a small, flower basket type continuous automatic tablet press machine. It is one of the necessary pharma machinery for pressing granular raw materials into tablets or granules in pharmaceutical, chemical, food, electronics and other industrial sectors. It is suitable for small-batch production, laboratories, hospitals and other units to suppress tablets, coal, sugar tablets, calcium tablets, coffee tablets, powder metallurgy, electronic components and various agricultural fertilizer tablets, etc. It can suppress all kinds of irregular-shaped and ring-shaped tablets, and it can suppress tablets with logos, texts and simple graphics engraved on both sides. Application and operation: 1. When the machine is in use, it is necessary to check whether the die has quality problems such as missing edges, gaps, deformation, etc., and check whether the equipment of the machine is in good condition. 2. Check whether the original granules meet the requirements. The fine powder content in the granules should not exceed 10%, so as not to affect the performance and life of the machine. 3. Rotate the pulley by hand or press the start button to test the pressure before starting the machine to make sure that the tablets meet the regulations. After the machine is running normally, it can be started and put into production. 4. The machine is equipped with a turn start button, which can be applied when lamination or upper punch sticks to the punching machine and checks the upper punch and die entry status during tablet pressing. It is only allowed to start instantaneously to turn the machine over a small amount during use, otherwise it will damage the machine parts. 5. Pay attention to the running status of the machine at any time when using it. If there is any abnormal sound, it should be shut down and checked, and then used after troubleshooting. Maintenance and maintenance of electric powder tablet press: 1. There are oil marks on the machine parts, which can be filled with grease or grease according to the type of oil marks. All the oil should be supplied once before starting the machine, and it can be added according to the heating up and operating conditions of the bearing during production. 2. Regularly check whether the parts are running smoothly and damaged, and if any defects are found, they need to be repaired in time. 3. At the end of one use or shutdown, the remaining powder on each part of the machine should be cleaned; if the shutdown time is long, the die must be removed, and the machine must be wiped clean, and the shiny surface of the machine parts should be coated with antirust agent. 4. Die maintenance: Clean, dry and apply anti-rust grease, then place it in a suitable container to keep it clean and avoid bump damage.
Whenever the question of CUSTOM SOLUTION SERVICES extraction machine is raised, one comes across the term ''.
SUZHOU PHARMA MACHINERY CO.,LTD. take prudent risks and work together to assure our success and profitability in the future.
It is one of the best products available in the market today. CUSTOM SOLUTION SERVICES is famous product in many oversees market.