_Tablet Press_High Speed_Single Punch_Double Layer_Flower Basket Type_Multifunctional Rotary Tablet Press PHARMA

A new type of tablet press machine developed by our company according to market demand. It can be used to press multi-step products. It has multi-mode, high pressure, high precision, stable tablet, reliable performance, time saving and high production efficiency. Suitable for pressing of p-dichlorobenzene, naphthalene, carbon powder and ceramics. Powder, abrasive, etc., with the advantages of multi-mode machine, labor-saving and time-saving, high production efficiency, etc., it is a variety of dry pressing molding machinery, such as sanitary products, camphor balls, magnetic materials, metallurgy, electronics, etc. piece. The tablet press has high precision, stable operation, good performance and high output. It is an ideal pharma machinery for pressing various powders such as carbon powder and abrasives.

Factors affecting the normal operation and service life of the tablet press:

1. The quality of the mold must be checked repeatedly before use, whether there are missing edges, cracks, deformation and tightness, and the pharma machinery is intact.

2. Check whether the powder of the granular substance is dry and whether the powder content in the granule does not exceed 10%. If it is unqualified, please do not press hard, otherwise it will affect the normal operation of the machine as well as its service life and material consumption.

3. The initial test should be placed on the pressure adjustment control indicator needle, pour the powder into the bucket, turn the test wheel by hand, adjust the filling and pressure at the same time, gradually increase to the weight of the tablet and the soft and hard program needs finished products, and then open first The motor goes into formal operation. During the production process, the tablet must be regularly checked for quality, compliance with requirements and, if necessary, adjusted.

4. The choice of speed directly affects the service life of the tablet press. Due to the nature of the raw material, the viscosity and size of the membrane and the pressure cannot be uniformly specified in use. The structure of the machine is a continuously variable speed device, which is suitable for slow speed suppression of minerals. , plant grass, large diameter, poor viscosity and other materials are difficult to quickly form, quickly applied to pressure bonding, lubricity and easy-to-form materials, so the user must according to the actual situation.

5. Managers must be familiar with the technical performance, internal structure, and principles of use of the control mechanism of the machine, and must not leave the work site during operation, so as not to damage the machine components, so as to ensure safe production.

6. Pay attention to the normal sound of the machine when the tablet press is in use. If there is screeching and strange noises, stop it and check to get rid of it. Don't use it.

Tablet press production process: The adjustment of the small dose requirement is determined according to the depth of the undercut into the middle die hole. This shows the actual length requirement for the center die hole. Different tablets are doses with different dosage requirements. Make adjustments after determining the size of the die according to the diameter of the punch. Adjust the filling amount of medicine in the die hole. Therefore, the adjustment mechanism of the molding machine is provided in the tablet press so that the dose can be adjusted at any time. Proper control of tablet thickness and compression is required. The dose of the drug is determined according to the previous prescription. Tablets cannot be changed from previous prescriptions. For storage, transportation and compression of tablets, the dosage is determined, because this will affect the actual thickness requirements and appearance requirements of the tablets. When pressing the tablet, the pressure needs to be adjusted according to the fact. This is necessary to adjust the upper punch down in the die hole. Some tablet presses are punched down during the pressing process, sometimes the lower punch is upward, and the upper and lower punches move relatively to complete the pressing process. Upper and lower units are used for pressure regulation.

Tablet presses control tablet thickness and compaction. The dosage of the drug is determined according to the prescription and pharmacopoeia and cannot be changed. For storage, storage and disintegration time constraints, a certain amount of pressure is also required during tablet compression, which will also affect the actual thickness and appearance of the tablet. Pressure regulation during tablet compression is critical. This is achieved by adjusting the amount of upstroke in the die hole. Some tablet presses not only have an upper punching action during the tableting process, but also a lower punching action, and the pressing process is completed by punching up and down

SUZHOU PHARMA MACHINERY CO.,LTD. as one who also teaches operations about how we use our whole operating system as a way to gain advantage and create considerable value and capture value in a sector where, in essence, the environment is quite hostile from a competitive point of view.

Dazzle your next event with extraction machine CUSTOM SOLUTION SERVICES and to buy best product， only trust SUZHOU PHARMA MACHINERY CO.,LTD..

There's the area of manufacturing CUSTOM SOLUTION SERVICES that's becoming very important. If you can create those things, you build this closed bond.

We studied how market-leading companies are harnessing data to reshapeSUZHOU PHARMA MACHINERY CO.,LTD., and explored how they can put data to work for us in ways that create value for our own businesses.

Your co-workers, investors and clients have busy schedules, and it can be hard to get everyone in the same place at the same time for CUSTOM SOLUTION SERVICES. So, it is important to create a connection between company and clients.