GMP Hard Wall Clean Room Pharmaceutical Powder Weighing Room
After Warranty Service: Video technical support
Certification: CE
Name: Weighing Booth
Control system: PLC control
Size: : 1600*3000*2600mm
Used: Clean room
Material: stainless steel 304/316
Clean grade: ISO5
Limit Discounts
Description
The purification weighing booth is made of stainless steel plate, which is never rusty, corrosion-resistant, light and solid.
The box adopts golden section proportion point design. The weighing booth is a local purification device for use in pharmaceutical, microbiological research and scientific experiments. It provides a vertical unidirectional airflow. Part of the clean air circulates in the work area and is partially discharged to the nearby area to create a negative pressure in the work area to prevent cross-contamination and to ensure a high cleanliness environment in the work area.
Characteristics The negative pressure weighing chamber is composed of several parts of the working area, return air box body, air box body, air box body and outer box body. The control panel is located on the front of the working area inside the equipment. The control panel uses a light-touch LED control panel to control the start and stop of the fan, adjust the working conditions of the fan, and adjust the wind speed required in the work area. ). There is a differential pressure meter next to it, the resistance of the test filter is also inside the air supply box and there is an exhaust adjustment board, which can adjust the exhaust volume of the equipment within a reasonable range (after the equipment is installed in place, it is set by a professional Try, please do not adjust without permission) |
Technical Parameters
| Model | PH-W series |
| Internal Size (W*D*H) | 1600*3000*2600 12000*3000*2600 I 2500*3000*2600 |
| External Size (W*D*H) | 1500*2400*2000 1900*2400*2000 2500*2400*2000 |
| Class/Air Flow | ISO5 0.45±20%m/s |
| Pre-filter | G4 (90%@5um) |
| Med-filter | F8 (85%~95%@1~5um) |
| HEPA filter | H14(99.995-99.999%@0.3) |
| Power Supply | 380V/30/50Hz(Advice if different) |
| Control Mode | VFD Control/Simens PLC Control |
| Rated Power | 3kW 4kW 5kW |
| Total/Exhaust Volume | 8000/800(m3/h) 110000/1000(m3/h) | 13000/1300 |
| UV Light | Optional |
| Light Intensity | 2300Lx |
| Noise | less than 70dB (A) |
| Different Pressure Gauge(3 nos.) | 0-60Pa/0-250Pa/0-500Pa |
| Socket | P66/Qty.4 |
| MOC | SUS304/1.2mm |
Installation