News

Home  > INFO CENTER  > BLOG  > 

Die Installation Of Single Tablet Press Machine

Die Installation Of Single Tablet Press Machine

2022-07-09

1. Installation of stamping die

(1) install the lower punch: loosen the lower punch fixing screw, turn the hand wheel to raise the lower punch rod to the highest position, insert the lower punch rod into the hole of the lower punch rod (pay attention to make the notch slope of the lower punch rod align with the lower punch fastening screw and insert it to the bottom), and finally tighten the lower punch fixing screw.

(2) installation of upper punch: loosen the upper punch fastening nut, insert the upper punch rod into the hole of the upper punch rod to the bottom, clamp the hexagon at the lower part of the upper punch rod with a wrench, and tighten the upper punch fastening nut.

(3) install the middle mold: loosen the fixing screws of the middle mold, take the mold flat and put it into the hole of the middle mold bedplate, at the same time, punch it down into the hole of the middle mold, press it to the bottom, and then tighten the fixing screws of the middle mold. When placing the middle mold, pay attention to flattening the middle mold, so as not to get stuck when placing it askew and damage the hole wall.

(4) turn the hand wheel by hand to slowly lower the upper punch into the middle mold hole, and observe whether there is any collision or friction. If there is collision or friction, loosen the fixed screws (two) of the middle mold platen, adjust the fixed position of the middle mold platen, so that the upper punch enters the middle mold hole, and then tighten the fixed screws of the middle mold platen. The installation is qualified only when there is no collision or friction when the upper punch enters the middle mold.

 

news-PHARMA-Die Installation Of Single Tablet Press Machine-img                 
news-PHARMA-img                 
news-Die Installation Of Single Tablet Press Machine-PHARMA-img                 
news-PHARMA-Die Installation Of Single Tablet Press Machine-img-1                 
news-PHARMA-img-1                 
news-Die Installation Of Single Tablet Press Machine-PHARMA-img-1                 

Suzhou Pharma Machinery Co.,Ltd.

2022/07/09

Mia


Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: