CO2 High pressure supercritical extraction machine
| 10L CO2 Supercritical Extraction Machine | |||
| NO. | Items | Specification | Material |
| 1 | Extraction Kettle | 10L / 50Mpa | SUS 316 |
| 2 | Separation Kettle I | 5L / 30Mpa | SUS 316 |
| 3 | Separation Kettle II | 3L / 16Mpa | SUS 316 |
| 4 | Filter | 2L / 16Mpa | SUS 304 |
| 5 | Mixer | 2L / 50Mpa | SUS 304 |
| 6 | CO2 Storage Tank | 5L 9.8Mpa | SUS 304 |
| 7 | CO2 50Mpa Pump | 100L / H co2 flow rate | SUS 304 |
| 8 | Pipe diameter | φ8 | SUS 304 |
For the supercritical extraction machine-
1.CO2 Pumb 2. Cooling System 3.Machine Valve
These are 3 most important parts that can directly tell by the machine quality and also influnce the machine production capacity and service time a lot.
Our CO2 Pumb adopted best quality in the market which using SUS 304Stainless steel body and 3 all ceramic stick to reduce the noise greatly and also will keep the machine work stably for long time.
The working pressure can achieve 50 Mpa instead of the normal pumb 40 Mpa.The using life is the normal pumb 5~10times.
High efficiency Air-cooled 5P type make CO2 storage tank low down the temperature fastly and Inner with high quality compressor to make sure the machine work long time no break.
And we used the Australia brand COOLSON.Machine with Environmental refrigerant R407C meet the environmental standard and high heat exchange efficiency.
In Europe or Amercian countries R22 refrigerant is forbidden once need supply is hard to find in Local.
And this is the easy damage part.The using frequency is the highest in production.So this part we used the best brand in the market.This is the 'USA' brand TESCOM the valve brought the most reliable performance.
All our kettle and valve interface all using SUS Stainless Steel 316 which is suitable for food grade we also increase the thickness and screw depth about 5cm more to keep our customers safety.
The kettle and valve can bear max pressure 60Mpa instead of others 50Mpa.
