Cleanroom coating equipment and installation layout
Cleanroom coating equipment and installation layout
Clean clean room modular coater is a machine for organic film coating and water soluble film coating of tablets, pills, candies, etc. Tablets or pills in a clean rotating coating pan, keep making complex trajectory motion, and spray coating accessories, while hot air blowing, so that the spray on the surface...
Text label: clean clean room modular installation layout, clean room equipment, clean clean room modular construction
Clean room coating equipment and installation layout
Clean room coater is a machine for organic film coating and water soluble film coating of tablets, pills, candies, etc. In the clean rotating coating pan, the tablets or pills continuously make complex trajectory movements, spray coating accessories, and at the same time blow with hot air, so that the coating dressing sprayed on the surface can be quickly and evenly dried, forming a firm, Dense, flat and smooth surface coating layer to achieve the purpose of coating, this is a water chestnut coating machine. The high-efficiency non-porous coating machine is mainly composed of a main engine, a hot air blower, an exhaust fan, a discharger, a power distribution cabinet, a mixing tank, a spray system, a microprocessor programmable control system, etc. It is composed of five components: air conditioner and heat exchanger; the hot air blower can directly collect air from the outside, and after the primary, middle and high-efficiency three-stage filtration, it can meet the requirements of 100,000 cleanliness, and the purification rate of dust particles larger than 5μm can reach more than 95%; clean room The exhaust fan is mainly composed of a fan, a bag filter, an ash cleaning mechanism and an ash collecting box. All parts are installed in a vertical cabinet, and the outer surface is made of stainless steel plate by fine polishing; In a negative pressure state, the dressing on the surface of the tablet core is quickly dried, and the exhaust gas discharged to the outside can be dedusted, which meets the requirements of environmental protection.
The entire coating process is completely isolated from the outside world, avoiding pollution and without dust flying and liquid splashing; the entire process operation process is controlled by a microprocessor programmable system, and can also be manually controlled. The control system has a variety of application programs, The operating state, speed and temperature closed-loop control can be selected, and it can run automatically according to the process flow and the optimal process parameters set; the film coating can be carried out continuously, and the coating medium can be sprayed and dried at the same time. The coating process can effectively improve the work efficiency; the temperature of the hot air entering the coating pot can reach up to 90 °C, and the dust removal and filtration of the exhaust air from the dust removal fan can reach 99%; the cleanliness level of the hot air entering the coating pot reaches the 100,000-level standard; Automatic control function; with negative pressure control function; with air supply control function; with real-time recording function; in-place cleaning function. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for clean workshops and purification projects.
In order to ensure the safe operation of the equipment and the good condition of the equipment components in the clean room, the best environment to control is: the minimum temperature is +5°C, the maximum value is +40°C, the maximum humidity is 70% HR, and the maximum altitude is 1500m; The three main components, the main engine, the hot air blower, and the fume cupboard, are connected by air ducts. Before connecting the air ducts, the air duct system must be thoroughly rinsed to keep the whole system clean without impurities; The indoor workshop structure should be led to the outdoors, but it should not be too long to affect the wind pressure; all flange connections must be sealed with silicone sealing rings, and then tightened with bolts and nuts to prevent air leakage. If the silicone tube of the peristaltic pump is broken during the coating process, immediately take a photo of the emergency stop button for injection, replace the feeding hose and reconnect it, and unscrew the emergency stop button to continue coating; if the air volume does not go up, check the air inlet. The direction of rotation and whether the intake and exhaust pipes are blocked.
PHARMA is the leading manufacturer of CUSTOM SOLUTION SERVICES and related products.
Boasting good reputation in the industry, SUZHOU PHARMA MACHINERY CO.,LTD. is the leading CUSTOM SOLUTION SERVICES supplier, offering high quality and CUSTOM SOLUTION SERVICES services for homes and enterprised all over the world. More info on PHARMA MACHINERY.
People tend to want what they perceive they cannot have. Making PHARMA seems exclusive or as if it will go out of stock if they don't act quickly often makes it more enticing to the consumer and increases the likelihood that they will buy in.
With its quality certified and recognised by professional intitutions and customers, SUZHOU PHARMA MACHINERY CO.,LTD. is one of the leading providers in China.
With wide range of [分类关键词] products of top quality in offer, SUZHOU PHARMA MACHINERY CO.,LTD. will definitely be your best option for CUSTOM SOLUTION SERVICES solution. Do feel free to contact us at PHARMA MACHINERY.