A Comprehensive Introduction of the Air Shower

With the acceleration of the pace of industry, some industries requiring high cleanliness are also changing day by day, people are also more and more sensitive to pathogenic bacteria, but now the industrial working environment is in a high cleanliness space that can not be achieved in nature, although now the use of clean rooms or aseptic rooms and other sterile and dust-free purification projects required equipment, But the biggest problem is the staff. Because the staff is the largest source of dust, when the staff enters the clean room or aseptic room, it is difficult to get out the dust and dust attached to the staff, so it is necessary to install jet dust removal equipment in the air shower room to forcefully remove the dust and bacteria attached to the staff and clothes.

Proper use of air shower

1. Before entering the air shower room, personnel should wear clean dust-free clothes, dust-free hats, dust-free gloves and other protective equipment, and ensure that clothing is properly worn to avoid wrinkles and gaps in clothing.
2. Air shower room shall not store debris, so as not to cause pollution.
3. When entering the air shower room, the front door of the air shower room should be closed to ensure that the two doors are electronically interlocked to prevent unpurified air from entering the clean room.
4. During the operation of the air shower, the personnel should raise their hands and rotate 360 degrees according to the instructions to ensure that the whole body is blown by the wind and beat the body to achieve the purification effect.
5. The air shower time is generally 20-60 seconds, the automatic door is opened after the end of the air shower, and the personnel quickly leave the air shower room.

Under normal circumstances, the air shower room is installed at the entrance of the clean room or aseptic room, and there can be no gap between the clean room wall panel. If there is a leak, pay attention to the installation of the equipment. Generally, for the maintenance of the device in the air shower room, it is necessary to clean it within a certain time according to the situation. For the front filter, you can wash with water or vacuum cleaning, generally every month of deterioration, to clean 2 to 3 times. If the main filter screen is tested 2 to 4 times a year, the clean workshop should determine whether the device should be replaced according to the wind speed value or the pressure measurement value.