These points will affect the use time of the tablet press_Tablet Press_High Speed_Single Punch_Double Layer_Flower Basket_Multifunctional Rotary Tablet Press PHARM

Factors affecting the normal operation and service life of the tablet press:

1. Before using the tablet machine, check the quality of the punching die repeatedly, whether there are missing edges, cracks, deformation, tightness and looseness, and whether the device is complete and good.

2. Check whether the powder of the granule raw material is dry and the powder content in the granule should not exceed 10%. If it is unqualified, do not press it hard, otherwise it will affect the normal operation of the machine, its service life and the consumption of raw materials.

3. For the first test run, place the positive needle of the pressure adjustment control on the top, pour the powder into the hopper, turn the test run hand wheel by hand, and adjust the filling and pressure at the same time, gradually increasing until the weight of the tablet and the soft and hard program reach Finished product requirements, then start the motor first, and start the formal production. During the production process of the tablet press, the quality of the tablets must be regularly checked to see if they meet the requirements, and adjustments should be made if necessary.

4. The choice of speed has a direct impact on the service life of the tablet press. Since the properties, viscosity, tablet diameter and pressure of the raw materials cannot be uniformly specified in use, the structure of the machine is continuously variable, and the slow speed is suitable for pressing minerals. , Vegetable grass, large sheet diameter, poor viscosity, etc., and fast and difficult-to-form materials are quickly suitable for pressing and bonding, good lubricity and easy-to-form materials. Therefore, users must decide according to the actual situation.

5. The management personnel must be familiar with the technical performance, internal structure, and the use principle of the control mechanism of the tablet press, and must not leave the workplace during operation, in order to prevent damage to the machine parts due to failure, so as to ensure safe production.

6. When the tablet press is in use, it is necessary to pay attention to whether the sound of the machine is normal at any time. When there are screams and strange sounds, stop the machine to check and eliminate them. Do not use them reluctantly.