The composition and operation instructions of the effervescent tablet press machine

The turbo single-punch tablet press is used to press various granular raw materials into round tablets. It is suitable for pharma machinery trial production or small batch production of various tablets, sugar tablets, calcium tablets, special-shaped tablets, etc. Its characteristic is a small desktop electric continuous tablet pressing machine, which can also be operated by hand. A pair of dies can be installed on the machine, and the filling depth of the material and the thickness of the tablet can be adjusted. The operating procedures of the turbo single-punch tablet press: 1. Before using the machine, check whether the die has any quality problems such as missing edges, cracks, deformation, etc., and check whether the various devices of the machine are in good condition. 2. Check whether the original granules meet the requirements. The fine powder content in the granules should not exceed 10%, so as not to affect the performance and life of the machine. 3. Before starting the machine, turn the pulley by hand or press the button along the way to test the pressure, make sure that the tablet meets the requirements, and the machine can only be started and put into production after the machine is running normally. 4. The machine is equipped with a reversing jog button, which can be used when laminated sheets or upper punching sticks to the punching machine and checks the situation of the upper punching die during tablet pressing. When using, only instantaneous jogging is allowed to make the machine slightly reversed, otherwise it will Damaged parts. 5. Pay attention to the operation of the machine at any time during use. If there is any abnormal sound, stop the machine for inspection and use it after troubleshooting. Maintenance and protection of turbo single-punch tablet press: 1. Oil cups are installed on the machine parts, which can be filled with lubricating oil or grease according to the type of oil cups. All the oil should be added once before starting the machine, and it can be added according to the temperature rise of the bearing and the operation situation during production. 2. Regularly check whether the parts are flexible and worn, and if any defects are found, they should be repaired in time. 3. After one-time use or when production is stopped, the residual powder in each part of the machine should be cleaned; if the machine is not used for a long time, the die must be removed, and the machine must be wiped clean, and the smooth surface of the machine parts should be coated with anti-rust oil. 4. Die maintenance: Scrub and clean, dry and apply anti-rust grease, then place it in a suitable container to keep it clean and prevent bump damage.

SUZHOU PHARMA MACHINERY CO.,LTD. devises a regular, independent, transparent and objective assessment mechanism to evaluate country performance.
SUZHOU PHARMA MACHINERY CO.,LTD. will be known for our leadership edge, through our passion for high standards, our respect for diversity and our commitment to create exceptional opportunities for professional growth so that associates can fulfill their highest potential.
With its quality certified and recognised by professional intitutions and customers, SUZHOU PHARMA MACHINERY CO.,LTD. is one of the leading providers in China.
CUSTOM SOLUTION SERVICES is one of the best products sold in the market today.
Did I make the right decision? Am I saving money? Would I do it this way again? Yes, yes and yes if you choose to visit PHARMA MACHINERY and make your enquiry.