Ten points of air purifier installation, use and maintenance
1. The installation site of air purifier equipment should be far away from far and high-speed sources and sources of vibration. It should be installed in purification workshops or air-conditioning workshops at all levels. It can be installed horizontally or vertically as needed. 5MM thick latex sponge should be placed on the installation surface during installation. Gasket frame to ensure air tightness. 2. The size of the installation hole of the air purifier self-purifier is determined according to the external size of the self-purifier. 3. If the air purifier equipment uses a voltage regulator, the voltage of the voltage regulator can be adjusted without changing the average wind speed of the air outlet, so that the self-purifier can be used most economically and the service life of the high-efficiency filter can be improved. 4. In order to ensure the cleanliness of the purification area, it should be turned on 15 minutes before each use. 5. The clean air blowing surface should be facing the work area that needs to be purified, and large areas of objects should be avoided during the period. Actions that significantly disturb the laminar flow should be avoided as far as possible in the purification area. 6. According to the cleanliness of the environment, regularly remove the non-woven filter material in the top pre-filter for cleaning. The interval is generally 3-6 months. Generally, when the non-woven filter material in the pre-filter turns black , can be removed for cleaning, or replaced. 7. Regularly (usually twice a month) use the Y9-4 dust particle counter to measure the cleanliness of the clean room modular or work area where the equipment is installed. If the technical parameters are not met, the high-efficiency air filter should be replaced. The life of the filter is 9600 hours. 8. When replacing the high-efficiency air filter, the front pressure frame of the purifier must be removed, and the high-efficiency air filter must be taken out. When replacing the high-efficiency filter with a new high-efficiency filter, the arrow on the high-efficiency filter should point to the direction of gas flow. 9. After replacing the high-efficiency filter, use the Y09-4 dust particle counter to scan and pick up leaks, and pay special attention to whether the surrounding frame is in good condition. 10. Electrical faults require professional maintenance. The operating temperature of the air purifier equipment shall not exceed 50 ℃, and the use of open flames is strictly prohibited.
In the present growing world of emerging technology, the has demanding operation in various sectors like extraction machine, extraction machine, extraction machine and many other industries at extraction machine levels of manufacturing and designing.
Super quality are in offer at PHARMA MACHINERY, welcome to visit us.
With so many suggestions and tips on diferent solutions to extraction machine issues, it is truly important to know how to find the most appropriate CUSTOM SOLUTION SERVICES at economical price.
In clean area management and quality control, laminar flow interference testing has received much attention, and whether it is only applicable to Class A laminar flow remains to be considered.