loading

Shanghai Microelectronics Semiconductor Manufacturing and Packaging Class 100 Clean Room Decoration Project Construction_

by:PHARMA     2022-11-02
The construction area of ​​the semiconductor clean room decoration project is about 4,500 square meters, of which the net area is 3,600 square meters. Let's take a look at the semiconductor class 100 clean room decoration contracted by sz-pharma! Project overview: Semiconductor class 100 clean room decoration project construction contractor: Shanghai Leijian Building Decoration Engineering Co., Ltd. Project address: Shanghai, Shanghai*** Microelectronics Technology Co., Ltd. Clean pharmaceutical cleanroom decoration grade: 100-1000-level clean workshop Construction area: about 3600 square meters Semiconductor clean room design scope includes: decoration scheme (enclosure, ground waterproof and thermal insulation treatment), HVAC scheme (air conditioning equipment, Air duct, water pipe, etc.), special gas supply scheme (special gas cabinet includes insurance control, room gas detection, EP grade pipeline and BA and pipeline. Supply tracheal exhaust gas treatment), compressed air scheme, waste gas treatment scheme (instrument and equipment POU treatment, Room exhaust and waste gas treatment) electrical scheme (power distribution of air conditioning equipment, etc.), weak point engineering, integrated control intelligent platform, pure water scheme (cooling water, deionized water, ultrapure water, water pipes, etc.), waste gas treatment. Selection criteria for waste gas treatment equipment in semiconductor clean room workshops: (1) The selection of waste gas treatment equipment is based on the type, concentration, flow rate and pressure of the gas to be eliminated, the processing capacity of the emission reduction pharma machinery, and comprehensive consideration of the life of the pesticide, the relationship between the front and back and the equipment In many cases, choose the appropriate treatment method and equipment. (2) Gas handling that may explode, ignite or produce hazardous substances when mixed should be a separate system. (3) Non-combustible materials are used in the exhaust ducts that may have spontaneous combustion gas or combustible gas flow. (4) Do not allow gas other than the gas specified in the equipment specifications to flow, or allow a large amount of gas to flow beyond the processing capacity of the exhaust gas treatment equipment. Temperature and humidity requirements for semiconductor clean room decoration workshops: Generally, the temperature and humidity conditions in the semiconductor production industry are: T=22 ± 2 °C, RH=45 ± 5%;
The post-heating (reheating) method is used for processing, and certain results have been achieved. However, there is a fatal problem in this method, the offset of cold and heat and the huge waste of energy consumption, especially due to the large fresh air in the semiconductor industry, the large exhaust system, the production environment is a large space and clean environment, and many factories are mainly concentrated in the distribution. The special situation in South China and East China makes this problem very prominent. Wall panels and ceilings: The partition wall of this project adopts the glass-magnesium rock wool sandwich panel 0.426 of the enterprise mouth-shaped mechanism. The glass-magnesium rock wool color steel plate meets the secondary fire protection requirements of the clean workshop. The glass-magnesium rock wool color steel sandwich panel has a temperature of 1000 ℃. Refractory performance, the fire resistance grade reaches Class A. Rock wool density: ≥100kg/m3; thermal conductivity: ≤0.046w/m.k; combustion performance: Class A (non-combustible). The fire resistance limit is 30-120 minutes. Widely used in food, electronics, medicine, beverage, biological research and other industries. Flooring: The floor in this workshop adopts anti-static PVC floor. Among them, Class 1000 and Class 100 workshops use anti-static heightened steel plates, and others are ordinary PVC floors. PVC floor is a new type of light-body floor decoration material that is very popular in the world today, also known as 'light-body floor material', which is widely used. Clean room and purification workshop decoration in clean room decoration construction Scan the QR code pattern below, add me on WeChat, get a free design quote
PHARMA is the leading manufacturer of CUSTOM SOLUTION SERVICES and related products.
No more need to worry about the condition of your extraction machine with , a CUSTOM SOLUTION SERVICES that helps in making your extraction machine look extraction machine like never before. Visit PHARMA MACHINERY to know more.
The extraction machine-type CUSTOM SOLUTION SERVICES is poised to lead the extraction machine market.
To find a qualified at reasonable price, contact SUZHOU PHARMA MACHINERY CO.,LTD. at PHARMA MACHINERY, a professional provider and tell them what you envision for your CUSTOM SOLUTION SERVICES.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: