quality room dehumidifier China for food factory
High air volume: Clean rooms filter dust and bacteria from the air through the circulation of air volume.
Meet the standards of cleanliness:To realize the control of non-biological particles and biological particles in the air,
Fan pressure head high: clean room at least commonly use early, middle and high level 3 filter, and the triple filter resistance added up to about 700 ~ 800 mpa,
Application: Cleanroom, dust free cleanroom, clean booth, laboratory, medical workshop, food factory
High air volume: Clean rooms filter dust and bacteria from the air through the circulation of air volume.
Water flow: Should be controlled by proportional integral, and the humidification should also be controlled by proportional integral or PID, so as to achieve higher control accuracy.
Size:Customized
Material: SUS 304
High temperature and humidity control accuracy:Different from the general comfort air conditioning to meet the requirements of personnel comfort
Limit Discounts
Description
The air conditioning system of clean room is different from the air conditioning system of general civil buildings. It requires the cleanliness of the control area in the first place. Besides, it also requires different degrees of temperature, humidity, vibration and noise.
At the same time, due to the characteristics of the semiconductor device production process, it is required that the clean workshop should be kept clean all day (24h). Therefore, the clean air conditioning system (including the exhaust system), the supporting cold and heat sources and the corresponding delivery system should be operated for 24h a day, which is also very different from other air conditioning systems.
Characteristics Compared with the general air conditioning system, the air conditioning system of clean plant in industrial buildings has the following characteristics : 1. large air supply volume, high fan requirements; 2.High filtration system requirements, 3. high temperature and humidity control accuracy; 4.Strict control of positive and negative pressures; 5.Should have good stability and reliability. The above characteristics of the air conditioning system in a clean workshop determine that the combination mode of fresh air units is more complex than that of the general air conditioning system, because its combination mode not only affects the cleanliness of the room, but also has an important influence on the temperature and humidity control accuracy of the room, and even affects the production of the whole workshop. |
Technical Parameters
| The product type | Precision air conditioning |
| Temperature range | The adjustable |
| Use | Laboratory, equipment room, museum, computer room |
| Main Sales Area | Europe and the United States |
| Custom requirements | Details to be negotiated |
Installation