Quality Assurance Measures for Clean Workshop Engineering Construction
Quality Assurance Measures for Clean Workshop Engineering Construction
The good quality assurance of the project also requires high-quality and qualified equipment and materials. For products with packaging, the outer packaging should be checked. If any damage is found, the manufacturer should be promptly notified to the site to unpack and inspect the indicators. It can be stored in the warehouse after it is qualified; in the acceptance...
Text label: engineering, construction quality assurance measures
Quality Assurance Measures for Clean Workshop Engineering Construction
The good quality assurance of the project also requires high-quality and qualified equipment and materials. For products with packaging, the outer packaging should be checked. If any damage is found, the manufacturer should be promptly notified to the site to unpack and inspect the indicators. Only qualified products can be stored in the warehouse; materials lacking material proof in acceptance are stored and marked separately, and can be put into use until the materials are complete; unqualified products should be confirmed by technicians and registered and sealed. Qualified materials and equipment will also produce quality defects if they are not stored properly. For example, the high-efficiency air filter used in the project will be easily damaged, leaked and difficult to remedy if it is not stored properly. Color steel sandwich panels and supporting profiles, Improper storage will damage the board surface, distort and deform, which will affect the quality of use and installation.
The storage environment should conform to the storage environment required for materials and equipment. It should be stacked and marked, indicating its name, specification, production plant, quality grade, quantity, etc.; the color steel sandwich panel should be stored away from the construction site. Closer places can be indoor or outdoor, but it must be placed horizontally and the size of the surrounding environment should meet its handling requirements. It is easy to damage it in a narrow environment. When storing and handling, special attention should be paid to the protection of the board surface. It is difficult to repair; it is forbidden to step on the color steel sandwich panel, because stepping on it will cause scars on the surface coating. This defect can only be found when the protective film is torn off after completion, and such scars cannot be repaired. If materials of different types of work are stored in the same warehouse, the material custodian should do a good job of on-site reminder and protection when handling materials to prevent scratches and damage to materials of other types of work. The supporting profiles of the color steel sandwich panel should be placed in shelves according to the category for easy access. For the storage racks of decorative profiles, the supporting distance should not be too large to prevent bending and deformation, and the surface of the brackets should be wrapped with soft materials to prevent pressure. mark. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for clean workshops and clean projects.
There are many cross-construction projects in clean workshops. In addition, civil engineering, fire protection and other majors have insufficient understanding of the quality requirements of clean workshops, which often causes scratches and damage to the walls; during cross-construction, each project team should remind the construction personnel. , the construction organization of the protected building products should arrange a special person to be responsible for the on-site inspection work; for the contradictions in pipeline installation, positioning and elevation, the conventional coordination principle should be adopted, the small pipe should avoid the large pipe, the upper water pipe should avoid the sewer pipe, etc. If coordination cannot be achieved, the construction In the pre-construction drawing review, it is very important to coordinate the elevation, direction and mutual position of each pipeline, so as to avoid contradictions in the construction process, and solve such problems as much as possible before construction and installation.
SUZHOU PHARMA MACHINERY CO.,LTD.'s products, whether interim or permanent, comply fully with all appropriate producing regulations.
SUZHOU PHARMA MACHINERY CO.,LTD. is a company that offers reliable products. For customization, extraction machine and extraction machine in different styles are also in the offer list. Click PHARMA MACHINERY for more details.
Our company is professional in manufacturing CUSTOM SOLUTION SERVICES especially extraction machine.
In clean area management and quality control, laminar flow interference testing has received much attention, and whether it is only applicable to Class A laminar flow remains to be considered.