2.Digital machining center precision manufacturing, in line with IPT standards
3.Corrosion resistance, impact resistance, wear resistance, high temperature resistance, long service life
nice tablet punch and die Punch And Die owner for chemical plant
Shop Activities
Product Description
Tablet press die can be engraved die Engraving punch is an important part of the tablet press, also known as the tablet press die in the industry. A pair of tablet press molds are divided into three parts: upper punch die, middle punch die and lower punch die. The punching dies we produce are round, special, rotary, single, etc., and each process of material, heat treatment, grinding, polishing, etc. contains many years of technical experience. Especially in terms of material selection, imported steel is especially selected to improve the quality of the mold. In terms of technical specifications, we always adhere to manufacturing standards.
The tablet press mold is assembled on the tablet press and is suitable for compressing Chinese and Western medicine tablets, nutrient tablets, lozenges, spirulina tablets, milk tablets, vitamin C effervescent tablets, effervescent tablets, seasoning blocks, mothballs (hygienic balls), Aromatic balls, disinfection tablets, fertilizer tablets, bath salt balls, button batteries, electronic components, metallurgical powder ceramic particles
This set of mould is suitable for ZP series tablet press. We have a large number of mould in stock. We can deliver the mould immediately after payment, or you can send your design to us
1 full set | 1 top punch + 1 bottom punch + 1 centre ring die | ||||
Model | ZP TDP | ||||
Prepare time | 30-40 working days | ||||
Die size | custom | ||||
backside design | breakline | logo | number | ||
Features
Detail Show
Tablets are a common dosage form in medicinal preparations because of their convenience to take, and the die is an indispensable accessory on the tablet press of commonly used tablet equipment. It is also a very important task to correctly select the appropriate die after the tablet press is purchased. In daily life, many tablet pharmaceutical factories cannot use the tablet press normally due to improper die selection.
In order to enable the users of the pharmaceutical factory to better order the appropriate die, this article will introduce some details. At the same time, it is recommended that the user of the pharmaceutical factory should have a full discussion with the die manufacturer first to reduce possible problems during production.
Due to the characteristics of track design and processing technology, it is recommended that users must purchase products from the same factory for tablet press and die, and do not frequently change mold manufacturers, but choose factories with strong strength and good processing accuracy.
Don't blindly pursue cheap and buy inferior dies, which will eventually damage the tablet press.
Selection of tablet type: The correct selection of tablet type is the first step to the success of a tablet die. For example, chewable tablets require high hardness and are easy to chew. Most of them use bevel-edged flat tablets; those that require film coating can choose shallow-concave tablets. Because there are no binders and lubricants in the raw materials of Chinese tablets, it requires high pressure when compressing tablets, and the tablet shape is preferably shallow. For tablets with high sugar content, the design of the tablet shape is preferably shallow or flat. The middle mold can use alloy steel or hard alloy. The deep-concave sheet die is easy to damage, so use it as little as possible.
Mold maintenance:
The main contents are cleaning, lubrication and inspection.
A. Maintenance during mold installation:
1. The upper and lower surfaces of the mold should be cleaned before installing the mold to ensure that the mold mounting surface and the working table of the press will not be compressed and damage the parallelism of the upper and lower mounting surfaces of the mold in production;
2. After the mold is installed, open the mold and clean all parts of the mold, especially the guide mechanism. For the surface part of the mold, its surface should be cleaned to ensure the quality of the parts;
B. Maintenance in production:
1. Oil the corresponding parts of the mould regularly during production. Such as: the pressing ring and fillet of the drawing die; the knife edge of the trimming die; the flanging knife block, etc;
2. Clean up the small hole waste channel of trimming and punching die regularly.
C. Maintenance after production:
1. After the end of production, the mold should be checked comprehensively;
2. Clean the mold completely to ensure the cleanliness of the mold;
3. Clean up the waste in the mould to ensure that there is no waste in the waste box;
4. If it is used for a long time, spray antirust oil after cleaning. If it is not used for a long time, put it in diesel after cleaning
Design Chart
Product Effect
Reference Project
TDP single punch tablet press machine in stock
This machine is designed for pressing round tablets from various granular materials, applicable to be used for research and
development and to small scale production. As its feature, it is an all desk-top continuous press driven by motor or man power.
Only one set of punch and die is mounted. The depth of the filling material and the thickness of the tablets can be adjusted.
development and to small scale production. As its feature, it is an all desk-top continuous press driven by motor or man power.
Only one set of punch and die is mounted. The depth of the filling material and the thickness of the tablets can be adjusted.
zp12 rotary tablet press machine
New type rotary tablet press gives you better quality and price, automatic tablet press for pressing granular raw materials into.
This machine is a single press type, continuous automatic tablet press for pressing granular raw materials into tablets. It is
mainly used in pharmaceutical industry and also the chemical, food, electronic, plastic and metallurgical industries.
This machine is a single press type, continuous automatic tablet press for pressing granular raw materials into tablets. It is
mainly used in pharmaceutical industry and also the chemical, food, electronic, plastic and metallurgical industries.
Tdp Tablet press punch die set
This mold could be used in Manual tablet press machine,TDP-0,TDP-1.5,TDP-5,TDP-6;Rotary tablet press (ZP-5.ZP-7 ZP-9 ZP-10 ZP-12
ZP-15 ZP-19 ZP-23 ZP-29 ZP-33 Etc
Tablet press punches, die, tablet press tooling and tablet press mould
ZP-15 ZP-19 ZP-23 ZP-29 ZP-33 Etc
Tablet press punches, die, tablet press tooling and tablet press mould
8mm pill press punch die
This mold could be used in Manual tablet press machine,TDP-0,TDP-1.5,TDP-5,TDP-6;Rotary tablet press (ZP-5.ZP-7 ZP-9 ZP-10 ZP-12
ZP-15 ZP-19 ZP-23 ZP-29 ZP-33 Etc
We apply the newest CAD/CAM technology and advanced heat treatment technology and scientific measuring means to machine various
kinds of punch and die with high grade bearing steel for tool..
ZP-15 ZP-19 ZP-23 ZP-29 ZP-33 Etc
We apply the newest CAD/CAM technology and advanced heat treatment technology and scientific measuring means to machine various
kinds of punch and die with high grade bearing steel for tool..
Packaging & Shipping
Company Information
SUZHOU PHARMA MACHINERY CO.,LTD. is able to provide customers with the most suitable Clean Room products to meet your particular needs.
SUZHOU PHARMA MACHINERY CO.,LTD. can guarantee free technical support for our Clean Room.
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
you might like
no data
Contact Us
Telephone: +86-18241958031/
+86-18913598640
Fax: 86-512-65488640
Email: pharma@sz-pharma.com
Whatsapp/Wechat: 008618241958031
Notice:
We hereby declare that our company's only legal contact is through the the above email, Any other similar suffix is a scammer email.
Address: NO.188 xiangwei road, near junction of xiangwei road and chengyang road (the second floor of south building inside of haiji feiyue) Xiangcheng district, Suzhou city, Jiangsu province, China
no data
Copyright © 2025 Suzhou Pharma Machinery Co., Ltd. | Privacy Policy Sitemap