Maintenance matters of tablet press punch

1. The tablet press machine can use a copper wire brush to remove the adhesion on the punch, and then use a velvet cloth to stick a small amount of abrasive paste to smooth the sheet surface. Do not throw it with a steel brush, otherwise it is easy to scratch the surface of the sheet; 2. If the adhesion is a bit hard and it is not easy to remove it immediately, you can soak the punch in boiling water for a few minutes, and the adhesion can be easily removed 3. If the customer does not have a CNC lathe, the price will not be expensive by purchasing a die grinding and polishing machine from the market; 4. In addition, it is also necessary to analyze it from the level of medicine Therefore, if the release agent (lubricant) is added less, some hard magnesium acid lubricant can be added appropriately (5-10%). The tablet press punch is a key component in the tablet press, also known as the tablet press die in the field. A pair of tablet press punches is divided into three parts: upper punch, middle punch, and lower punch. The processed punches include ring type, special type, tubular type, single injection, etc., in material, heat treatment process, grinding, polishing, etc. Tablet press is used to compress various granular materials into discs, suitable for laboratory research or small batch production of various pills, sugar tablets, calcium tablets, etc. It is a small and medium-sized desktop all-in-one electric (manual) continuous tableting equipment. There is a pair of dies installed in the machine. The filling depth of raw materials and the thickness of the tablet can be adjusted.