Interior decoration of sterile clean workshop
Interior decoration of sterile clean workshop
The main body of the clean pharmaceutical cleanroom should not be prone to cracks and gaps under the condition of temperature change and vibration. The main body should be made of materials with less dust generation, less adhesion of dust particles, good heat insulation performance and low hygroscopicity; the envelope structure and Interior decoration should also choose good air tightness, and under the change of temperature and humidity...
Text label: clean pharmaceutical cleanroom decoration, sterile workshop decoration, clean workshop decoration company
Interior decoration of sterile clean workshop
The main body of the clean workshop should not be prone to cracks and gaps under the condition of temperature change and vibration. The main body should be made of materials with less dust generation, less adhesion of dust particles, good heat insulation performance and low hygroscopicity; the envelope structure and Interior decoration should also be made of materials with good air tightness and small deformation under temperature and humidity changes; the surfaces of walls and ceilings should be smooth, flat, free from dust, dust, corrosion-resistant, impact-resistant, and easy to clean. The connection with the wall, ground and ceiling should have a certain arc, and it should be made into an arc with a suitable radius; the surface decoration of the air supply duct, return air duct and return air trench should be compatible with the entire air supply and return air system, and Easy to remove dust; clean room windows should be designed as fixed and sealed windows, with as few window sashes as possible, no window sills, and the area of u200bu200bthe window sills limited to a minimum. Prevent pollution particles from infiltrating from the outside; avoid condensation due to indoor and outdoor temperature difference, doors and windows should be simple in shape, not easy to accumulate dust, easy to clean, and no thresholds should be set for door frames.
The decoration materials in the clean workshop should be able to meet the requirements of cleaning resistance, no pores and cracks, smooth and smooth surface, and no particulate matter falling off. Terrazzo floor, this kind of floor has good integrity, smooth, wear-resistant, not easy to dust, easy to scrub and clean, has a certain strength, and impact resistance. PVC floor, this kind of floor is smooth, slightly elastic, not easy to dust, easy to scrub and clean, corrosion-resistant, commonly used thick hard vinyl plastic floor and PVC plastic floor, this kind of finishing material has block and roll It is pasted with a special adhesive. There are fewer joints in the roll shape than in the block shape. The joints are welded with homogeneous materials, and can also be bonded with adhesives. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for clean workshops and sterile workshops.
The door of the clean pharmaceutical cleanroom has two main functions, one is as a pedestrian passage, and the other is as a material transportation passage. With the increase of the cleanliness level, in order to reduce the pollution load, these two functions have different requirements for the door; the door requirements Flat, smooth, easy to clean, not deformed, the door is flush with the wall, and it is closely matched with the automatic opener. The air locks at both ends of the door are controlled by electronic interlocking. The windows must be fixed windows, in the form of single-layer fixed windows and double-layer fixed windows. The windows are required to be tight and flush with the interior wall. The windows should be made of large glass windows as much as possible, which not only provides a bright and pleasant environment for operators, but also facilitates Managers can observe the operation through the window, which can also reduce the accumulation of dust, which is also conducive to cleaning work; double-layer windows are more suitable for rooms with high cleanliness, because the two layers of glass are flush with the wall, and there is no accumulation of dust.
The power distribution circuit in the clean workshop should be set up with distribution circuits according to the areas divided by different air cleanliness levels. Generally, equipment located in different air cleanliness levels should not be powered by the same power distribution circuit. All power distribution lines should be equipped with cut-off devices, and should be located in a clean area for easy operation and management; if the cut-off device is located in a non-clean area, its operation should be by remote control, and the remote control device should be located in the clean area. The electrical pipelines in the area should be laid hidden, and the pipes should be made of non-combustible materials.
SUZHOU PHARMA MACHINERY CO.,LTD. thinks that customer satisfaction is one of the most important determinants of brand loyalty. High-quality service can be the difference between a one-time buyer and a lifelong repeat customer.
SUZHOU PHARMA MACHINERY CO.,LTD. will continue to bring our industry nuances of style and approaches to CUSTOM SOLUTION SERVICES which are consistent with our evolving aspirations.
There are ample scientific evidence of reducing the risk of extraction machine.
If something seems too good to be true, then it can be a , which provides extraction machine value over its cost.