Instructions for the use of rotary tablet presses

Tablet pressing and forming of the rotary tablet press are completed by the opposite movement of the upper and lower punches. The axial movement of the upper and lower punches is controlled by the guide rails of the upper and lower punches. The upper punching guide rail can be spliced ​​by multiple guide rails to form a return-shaped guide rail disc, which is expanded to 180 degrees, indicating that the rotary tablet press is double-discharged, and the same guide rail remains at another 180 degrees, and the turntable produces two tablets per week. The guide rail disc is fastened to the upper part of the non-rotating mandrel, and the reduced diameter of the tail of the upper punch contacts with the curved flange of the upper punch guide rail. The cross-sectional shape of the flange of the upper punch guide rail will match the section of the upper punch’s reduced diameter. When the upper punch rotates with the working turntable, it will be controlled by the guide rail to produce axial movement. The rotary tablet press has the characteristics of high output, which is ten to dozens of times higher than that of the single-punch tablet press, and the quality is good and stable. The rotary tablet press adopts the upper and lower punches to pressurize at the same time, the pressure gradually increases, the pressure is uniform, and the air in the granules can be discharged smoothly. Rotary tablet press reduces fragmentation. The pressure wheel is used to roll and pressurize, the punches are evenly and closely arranged to overcome the impact phenomenon, the machine runs smoothly, and the noise is low. The feeder is fixed, the feeding time is longer, the air is easier to discharge, the separation of light and heavy particles is less, and the tablet weight is more accurate. The above is the industry sharing about the rotary tablet press, I hope you can like it.