Inspection of clean laboratory furniture and facilities
Inspection of clean laboratory furniture and facilities
The setting and design of laboratory auxiliary facilities such as laboratory central table and desk should ensure the unobstructed exit and the convenience of activities in the laboratory. The designer should divide the laboratory according to the function of the central table and the position of the main fixed equipment; According to the structure, the table is divided into: fixed...
Text label: testing laboratory furniture, clean laboratory facilities
Testing clean laboratory furniture and facilities
The setting and design of laboratory auxiliary facilities such as laboratory central table and desk should ensure the unobstructed exit and the convenience of activities in the laboratory. The designer should divide the laboratory according to the function of the central table and the position of the main fixed equipment; The bench is divided into: fixed experimental bench and combined experimental bench according to the structure. The height of the test bench should be 800-900mm, the width of the single-sided test bench should be 650-800mm, and the width of the double-sided test bench should be 1500mm. The length should be determined according to the specific requirements of the experiment. The length of the experimental bench required by each laboratory personnel, due to the different nature of the experiment, the range of its value varies greatly. Generally, the minimum length of 1200mm per person should not be less than 1000mm for experiments, while the organic chemistry experimental bench needs to be considered longer. , desirable 1400-1600mm. If the pipelines are long and stacked on the table, the bottom row is a water pipe, and a long drainage groove is set in the middle of the test table, which is not simple in appearance, easy to accumulate dust on the horizontal pipe, and the two sides of the test table are separated by pipelines The advantage of not being able to transfer items is that the service supply is more convenient; if the pipeline service is concentrated on several pipeline boxes to lead out the surface, the shortcomings of the previous form are avoided, but when designing, it should be noted that the use range of each pipeline box should not be too large. Otherwise, the rubber lead pipe will be too long; the practice of setting up a long duct box on the test bench is more convenient to use and supply than the previous one, but it reduces the effective net width of the test bench.
The test bench is the most vulnerable part of the laboratory equipment. The choice of the table material directly affects the use of the test bench and the correctness of the experimental results. Therefore, it is necessary to choose a table that is beautiful, durable and meets the experimental requirements. very important. Steel countertops are generally made of stainless steel, with a thickness of 1.2mm stainless steel plate. They have good heat resistance and impact performance, and are easy to remove from rust and contaminants. They have excellent load-bearing capacity and can be installed on steel pipe frames. This kind of countertop is beautiful Durable, suitable for other laboratory use other than chemical laboratory, such as biochemistry and oil testing, etc., the price is higher. Synthetic resin is a high-density, molecular modern synthetic resin material with good physical properties and chemical resistance. , its cost performance is the best choice for the laboratory at present. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for clean laboratories and testing laboratories.
1mm thick corrosion-resistant physical and chemical plate, frame and honeycomb structure, can resist acid, alkali, scratch, wear, high temperature, no capillary pores on the surface, it is an environmentally friendly material, with black, white, gray and other colors. The overall solid core physicochemical board table top, the solid core physicochemical board with thickness of 12.7mm, 15mm, 20mm, 25mm is processed and trimmed, and the surface has no capillary holes and is easy to clean. It is an ideal countertop material with good acid and alkali resistance. Corrosive, suitable for clean laboratories. The clear distance between the side test benches arranged against the walls on both sides should not be less than 1.5m, and when the laboratory instruments and equipment are arranged against one side wall, the clear distance between the laboratories on the other side should not be less than 1.8m m; For a conventional pharma machinery consisting of a standard unit, the clear distance between the side test benches arranged against the two side walls and the island or peninsula-style central test benches arranged in the middle of the room should not be less than 1.5m. When arranging experimental equipment, the clear distance between it and the test bench should not be less than 1.8m, and the clear distance between the end of the test bench and the walkway wall should not be less than 1.2m. The inner wall of the general laboratory should be set up with a built-in or wall-mounted item cabinet. The bottom of the item cabinet should not be less than 1.2m from the ground. The item cabinet should have sufficient bearing capacity and be firmly connected to the wall. The position of the board should be movable up and down.
Currently there is a global trend growing. People are more conscious about extraction machine and are seeking alternatives to traditional solutions.
SUZHOU PHARMA MACHINERY CO.,LTD. will become the destination store for customers, offering the convenience of multiple brands and channels, and providing a personal high touch shopping experience that helps create lifelong customer relationships.
We are making CUSTOM SOLUTION SERVICES available to you at a very low price.