How to Choose Tablet Press Machine？

The TDP series single punch tablet press machine is equipped with only one set punch die, which is suitable for small-batch production in pharmaceutical factories, chemical plants, hospitals, scientific research units, laboratories and other units. The machine has excellent performance, strong adaptability, easy use, simple maintenance, small size, light weight, and can be operated by hand when there is no electricity.

ZP rotary tablet press machine, models from ZP7 tablet press machine to ZP35 tablet press machine, suitable for mass production. Machines with specifications of ZP23 and above models can also press double-layer tablets and three-layer tablets, with the following advantages:

1. The exterior of our machine is fully enclosed, made of stainless steel, and the internal table is made of stainless steel. While ensuring the surface gloss, it can also prevent internal dust from overflowing, and can also prevent external air bacteria from contaminating the production of internal tablets, which meets GMP requirements.

2. A transparent protective cover is installed on the outside of the mold, which can clearly observe the production process status. When the machine is running, the protective cover is closed to prevent cross contamination. When the machine stops running, the side panel can be fully opened to facilitate internal cleaning, mold replacement and daily maintenance.

3. The placement and operation procedures of all controllers are in line with the use habits and regulations of personnel. The human-machine interface variable frequency speed control device is used, and the electrical speed control and forward and reverse rotation are adopted.

4. The touch screen PLC control operation is simple to operate and can be used by personnel after simple training. The production is convenient, the machine runs smoothly, and the tablet production is completed quickly, safely and accurately. The implementation of mechatronics is in line with the development and popularity of pharmaceutical equipment.

5. Good heat dissipation performance and not prone to failure.

6. Wear-resistant and corrosion-resistant, extending service life.

7. The machine has high pressure and can adapt to the production of tablets of various sizes and difficult-to-form tablets.

8. The transmission system is not exposed to the outside and will not cause cross contamination. It is independently placed and sealed under the main machine.

9. The machine is equipped with a dust suction device to prevent dust from spilling out, and can absorb and control the dust raised in the machine.

10. It can press single-layer tablets, double-layer tablets, three-layer tablets and special-shaped tablets to meet the needs of different customers.

We can also customize TDP punch and ZP punch of various sizes and patterns to be used with tablet presses machine. Suzhou Pharma waiting for your consultation 24 hours.

Suzhou Pharma Machinery Co.,Ltd.

2024/09/02

Icey