Features of turbo single-punch tablet press and precautions when using it

The turbo single-punch tablet press machine can compress powder and granular raw materials into tablets. This machine has excellent performance, strong adaptability, convenient use, easy maintenance, small size, light weight, and can also be hand-cranked when there is no electricity. This machine is only equipped with one pair of punching dies (the size of the die is optional), the filling depth of the material and the thickness of the tablet can be adjusted, as long as the different dies are replaced, different products can be pressed. It can meet the requirements of pressing various Chinese and Western medicine tablets in the pharmaceutical industry and the requirements of pressing various similar products in other industries. Features of the turbo single-punch tablet press: 1. Press various granular raw materials into discs and tablets with various geometric shapes and engraved with trademarks, text and simple graphics on both sides. 2. The turbine drive is added, there is no power transmission belt, the noise is very small, and the tablet can be pressed by hand when there is no electricity. 3. Install a pair of punching dies, and products of different shapes and sizes can be pressed by changing different dies. 4. The filling of the material and the thickness of the tablet can be adjusted, so that the weight of the tablet can be controlled. 5. Low noise, lightweight, easy to operate and move. Precautions when using the turbo single-punch tablet press: 1. Before the first use, you should read this manual carefully in comparison with the actual machine, and then use it. When the pharma machinery is in use, it should be supported on a fixed workbench. 2. Do not put your hands under the upper mold and the middle mold to avoid personal injury. 3. The machine can only run in a certain direction and cannot be reversed to avoid damage to the machine parts. Be especially careful when adjusting the tablet, and don't be negligent. 4. Before starting, the upper punch rod should be in the rising position and then start. If it is started when the upper punch is lowered, it will enter the middle die pressing sheet just after the start. At this time, because the machine has not yet been raised and the inertia is small, it is easy to cause a jacking accident. (That is, after the upper punch enters the middle mold, due to the resistance of the tablet,“top die”, to stop the machine. Due to the large load when jacking up the car, the machine parts are often damaged). 5. Handling method after jacking (1) When the jacking situation is light, turn the handwheel by hand to let the upper punch pass“dead point”(However, it cannot be reversed, so as to avoid repeated feeding by the feeder, resulting in more serious jacking). (2) In the case of severe jacking, loosen the locking nut of the connecting rod, turn the upper punch rod to make it rise to reduce the pressure, and then turn the handwheel to eject the tablet. Then readjust the tablet hardness. 6. During the tablet compression process, the tablet quality (tablet weight, hardness, surface finish, etc.) must be checked frequently and adjusted in time.

SUZHOU PHARMA MACHINERY CO.,LTD. is recognized as one of the leading manufacturer of in China.Trust in us and make SUZHOU PHARMA MACHINERY CO.,LTD. your CUSTOM SOLUTION SERVICES supplier. Our products will bring more economic value to you.
If you need CUSTOM SOLUTION SERVICES solution, you should always consult a professional provider. SUZHOU PHARMA MACHINERY CO.,LTD. is one such a competent provider that is highly qualified to offer a wide range of products and services. Visit today!
PHARMA is one of the top brands in their class when it comes to CUSTOM SOLUTION SERVICES and extraction machine. If you check online, PHARMA is often rated high and reviewed with much praise. we would be very pleased to receive your inquiry.