Factors affecting the normal operation and service life of the tablet press1
1. Before use, the quality of the die must be checked repeatedly, whether there are missing edges, cracks, deformation, tightness and looseness, and whether the device is complete and good. 2. Check whether the powder of the granule raw material is dry and the powder content in the granule does not exceed 10%. If it is unqualified, do not press it hard, otherwise it will affect the normal operation of the machine, its service life and the consumption of raw materials. 3. For the initial test run, place the indicator needle of the pressure adjustment control on 6, pour the powder into the hopper, turn the test run hand wheel by hand, and adjust the filling and pressure at the same time, gradually increasing to the weight of the tablet and the soft and hard program Meet the requirements of finished products, then turn on the motor first, then turn on the clutch, and carry out formal operation production. During the production process, random inspections must be made regularly