Eye ointment production dust-free purification workshop
Eye ointment production dust-free purification workshop
The preparation of eye ointment is basically the same as that of general ointment, but it must be carried out under decontamination conditions. Generally, it can be prepared in a decontamination operation clean room modular or in a decontamination operation table. Avoid infection caused by contaminating microorganisms; when preparing...
Text label: eye ointment production purification workshop, eye ointment production dust-free workshop, purification workshop design and decoration
Eye ointment production dust-free purification workshop
The preparation of eye ointment is basically the same as that of general ointment, but it must be carried out under decontamination conditions. Generally, it can be prepared in a decontamination operation clean room modular or in a decontamination operation table. Avoid contaminating microorganisms and cause infection; when preparing, those that are easily soluble in water and have stable properties can be dissolved in a small amount of sterilized distilled water, then added to the sterilized matrix in stages, and ground evenly; When the matrix is u200bu200bused, it should be ground into a very fine powder, and a small amount of sterilized liquid paraffin should be used to grind it into a paste, then add the rest of the matrix to stir, and fill it in a sterilized container; the lanolin oil in the matrix has a surface active effect and has strong water absorption. It is easy to mix with tears, and it is easy to adhere to the ocular mucosa, and it is easy to penetrate the cornea. The eye ointment used for eye surgery or trauma should not be added with bacteriostatic agents or antioxidants.
Eye ointment in mass production, using mixer, grinder, filler, etc., should also be washed and dried during production, and then scrubbed with 70% ethanol, generally packaged in ointment tubes, such as aluminum tubes or plastic tubes, etc. The advantages are easy to use, good airtightness, and not easy to contaminate, but the containers and packaging used should be strictly sterilized to avoid contamination of packaging materials; the storage temperature should not be too high or too low, so as to avoid degradation or matrix stratification and affect the curative effect. The items that should be checked for eye ointment are: metallic foreign body, filling amount, particle size, and sterility check. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for eye ointment production purification workshops and dust-free workshops.
The colloidal particles in the suspension gel should be evenly dispersed, and should not settle and agglomerate, and should indicate 'Shake well before use' on the label; the topical gel should be uniform, fine, and free of lumps. Keep gelatinous at room temperature, not dry or liquefied; the gel should be stored in a dark and airtight container in a cool place below 25 ℃, and should be prevented from freezing; The amount and microbiological inspection of the glue shall comply with the regulations.
Most people who see a in operation for the first time are amazed at how well the extraction machine is managed.
Knowing these basics of is every essential. But if you don't know how to choose the proper for your specific need, let SUZHOU PHARMA MACHINERY CO.,LTD. experts be your guide. Enquire us at PHARMA MACHINERY.
We began investing in our workforce and negotiated deals with major suppliers and providers to lower the cost of equipment so the technicians could enhance the competitiveness of CUSTOM SOLUTION SERVICES right away.
In clean area management and quality control, laminar flow interference testing has received much attention, and whether it is only applicable to Class A laminar flow remains to be considered.