Explain the related use skills of the tablet press1
Doing a good job in the maintenance of the tablet press is the focus of each operator's attention. The following is an introduction by the editor. When using the equipment, if there is uneven distribution of particle size and different particle flow rates during tablet compression, resulting in uneven particle size filled into the die hole, if the amount of coarse particles is large, the tablet will be light, and if the amount of fine particles is large, the tablet will be heavy. The granules should be mixed or sieved to remove excessive fine powder. If there is fine powder adhering to the punch and causing hanging punch, the difference in tablet weight will be large. At this time, the rotation of the lower punch is not flexible, it should be checked in time, the die should be removed, and the lower punch and the middle die hole should be cleaned.