Explain in detail the structure and use requirements of special-shaped die tablet press_Tablet press_high speed_single punch_double layer_flower basket_multifunctional rotary tablet press

The structure and use requirements of the special-shaped die tablet press machine: If the tablet is pressed in a special-shaped die, the die has certain positioning requirements, such as square, triangle, oval, etc. The upper punch of the turntable has structural requirements on the tablet press. Since the upper punch requires a directional key, it cooperates with the upper punch of the locating key during installation, thus increasing the requirements for the punch. The lower punch will not leave the middle die hole during the working process, and no other processing is required. The tablet punch with a special-shaped die tablet press cannot rotate freely, but moves up and down along the upper and lower guide rails. When the turntable is driven, the punch and the guide rail are slid and rubbed, so that the punch and the guide rail wear each other. Therefore, when we use them, we must pay attention to lubrication. We have to remember to do maintenance every day. If it is not loose or worn, we should check it regularly. When it is affected, the ram and intermediate die cannot operate.

After the punch and the middle die are accurately positioned, the special-shaped die can be installed, and when the punch is in the middle die hole, the punch is tightened, making the positioning inaccurate. After installing the mold, turn the hand plate several times, and then move the operation without any special circumstances.