D-class, C-class clean area cleaning management
D-class, C-class clean area cleaning management
Cleaning frequency of D-class clean area, once before and after production, the replacement varieties must be cleaned according to this regulation, and thoroughly cleaned once a week; the production remnants and wastes in the clean area are removed, and the equipment in the clean area shall be cleaned according to the corresponding Clean according to the cleaning procedures, and the containers in the clean area shall be cleaned according to D...
Text label: Class D clean area, Class C clean area, Clean management of clean area
Class D, Class C clean area cleaning management
Cleaning frequency of D-class clean area, once before and after production, the replacement varieties must be cleaned according to this regulation, and thoroughly cleaned once a week; the production remnants and wastes in the clean area are removed, and the equipment in the clean area shall be cleaned according to the corresponding Containers and utensils in the clean area are cleaned according to the cleaning procedures for containers and utensils in the D-level clean area; walls, workbenches, ceilings, doors and windows, and floors are vacuumed to absorb surface dust, and wiped with wet cleaning cloths and mops. The surfaces of the workbench, floor, doors and windows are stained, and where the dirt accumulates, use a brush and detergent to remove the dirt, and disinfect it with disinfectant if necessary; clean and store the D-level cleaning tools in the cleaning tool room according to the cleaning tool cleaning regulations. And stick the logo.
The equipment surfaces and components in direct contact with materials in the D-level clean area shall be disinfected once before and after use. The replacement varieties must be thoroughly cleaned and disinfected according to this regulation. In special cases, it shall be thoroughly cleaned and disinfected according to this regulation. After production every week Thoroughly clean and disinfect once; before use, use 75% ethanol solution to disinfect the surface and parts of the equipment that are in direct contact with the material. After use, use a vacuum cleaner to absorb the dust on each surface of the equipment, use a brush to remove the residual dust, and use a wet cleaning cloth to remove the surface of the equipment If there are any stains, use a brush and detergent to remove the dust and dirt where the dust accumulates, and disinfect it with a disinfectant if necessary. After the detachable parts of the equipment are disassembled, brush to remove the dust on each surface, rinse with purified water once, and use 75% ethanol solution to sterilize the surface and parts of the equipment that are in direct contact with the material. After drying, the parts are placed in designated containers. Production ends every week After cleaning, sterilize all parts inside and outside the equipment, fill in the equipment cleaning and disinfection records after cleaning, pass the inspection by the inspector, and attach a 'cleaned' label card. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for Class D clean areas, clean rooms, and purification projects.
Class C clean area is cleaned once a day before production operation and after work. Surfaces of equipment that directly contact medicines are cleaned and then disinfected with disinfectant. Cleaning range: remove and clean waste liquid receptacles, wipe walls with purified water Surfaces, doors, windows, floors, indoor utensils and outer walls of equipment are stained; after work every Saturday, clean and disinfect once. Cleaning range: scrub all parts of the room with purified water, including floors, waste receptacles, floor drains, lamps, drains Air vents, ceilings, etc.; after the end of production every month, large-scale cleaning and disinfection are carried out, including dismantling and washing equipment accessories and other auxiliary devices, and the disinfection frequency is determined according to the indoor bacteria inspection. Cleaning and disinfection method, first thing first, first inside and then outside, first up and then down, wipe once with filtered purified water, wipe off stains with detergent if necessary, then wipe off the residue of detergent, and then use disinfectant Disinfect once. Before the operation of the capping posts in the biochemical workshop and powder injection pharmaceutical cleanroom, disinfect the room and equipment once with 75% ethanol. After the production is over, wipe the floor with 5% methanol soap; the floor of the infusion workshop is preferably rinsed with purified water. , Control the particles, the disinfectant used in the powder injection workshop is preferably alkaline; after the cleaning tools are used, they should be disposed of according to the cleaning tool cleaning procedures, and stored in the designated position between the cleaning tools and marked.
Service-based companies as SUZHOU PHARMA MACHINERY CO.,LTD. are increasingly becoming more popular internationally.
SUZHOU PHARMA MACHINERY CO.,LTD. will expand our presence in direct selling and lead the reinvention of the channel, offering an entrepreneurial opportunity that delivers superior earnings, recognition, service and support, making it easy and rewarding to be affiliated with PHARMA and elevating the image of our industry.
Regularly improving CUSTOM SOLUTION SERVICES in accordance with customer feedback is a great way to show your brand listens and cares.