Clean room transfer window management rules and precautions

As an auxiliary pharma machinery of the clean room, the transfer window is mainly used for the transfer of small items between the clean area and the clean area, and the non-clean area and the clean area, so as to reduce the number of door openings in the clean room and minimize the damage to the clean area. Pollution. However, the seemingly simple transfer window will still pollute the clean area if there is no certain management rules to regulate the use of the transfer window. In order to further improve the safety of the use of the clean room transfer window, sz-pharma will discuss the Do a simple analysis for you for reference. 1. Clean room transfer window steps/methods: Since all transfer windows are installed with interlocking devices, the door of the transfer window can only be opened and closed at the same time. Open the door of the transfer window (if the door on the other side is not closed, it cannot be opened), put the material to be transferred into the transfer window, close the door of the transfer window, and the operator on the other side opens the door and takes out the material in the transfer window , close the door of the transfer window. The transfer window is managed according to the cleanliness of the higher-level clean area connected to it. For example, the transfer window connected between the coding room and the filling room should be managed according to the requirements of the filling room. After the shift, the operator in the clean area is responsible for wiping the interior surfaces of the transfer window and turning on the UV sterilization lamp for 30 minutes. When the material is from a low level to a higher clean level, the cleaning work on the surface of the material should be done well. Always check the working conditions of the UV lamps in the transfer window, and replace the UV lamps regularly. Since the transfer window is interlocked, when the door on one side cannot be opened smoothly, it is because the door on the other side is not closed properly. Do not force it to open it, otherwise the interlocking device will be damaged. When the interlocking device of the transfer window fails to work normally, it should be repaired in time, otherwise it cannot be used. 2. Precautions for clean room transfer window The transfer window is managed according to the higher cleanliness level connected to it. No materials or sundries can be placed in the transfer window. The transfer window is generally managed by the clean area operator.

Most places have a few choices when it comes to extraction machine CUSTOM SOLUTION SERVICES distributors, but it can sometimes be difficult to find the right supplier for your needs. The quality of CUSTOM SOLUTION SERVICES is critical to extraction machine.

Exceed our customers’ expectations by being the leading provider of safe, responsive, value-added services in the CUSTOM SOLUTION SERVICES industry.

SUZHOU PHARMA MACHINERY CO.,LTD. provides innovative technology and prompts our customers to know the development of our producing CUSTOM SOLUTION SERVICES.