Clean room purification scheme selection
Clean room purification scheme selection
The air in the clean room should be adapted to the clean room level, temperature and humidity. The air should not only undergo a series of purification treatments, but also be heated, cooled or humidified and dehumidified; the initial effect of purifying the air conditioning system And medium-efficiency filters are generally concentrated in the air-conditioning room, ...
Text label: clean room purification scheme, clean room design and installation, clean clean room modular decoration company
Clean room purification scheme selection
The air in the clean room should be adapted to the clean room level, temperature and humidity. The air should not only undergo a series of purification treatments, but also be heated, cooled or humidified and dehumidified; the initial effect of purifying the air conditioning system and medium-efficiency filters are generally arranged in the air-conditioning room, while high-efficiency filters are often arranged at the end of the purification air-conditioning system, such as the ceiling of the clean room, to prevent the clean air sent into the clean room from being polluted again; the cleanliness of the clean room Below 100,000 grades, no high-efficiency filter is required in the purification air-conditioning system; in the sterile room of the quality inspection center of the pharmaceutical factory, a local purification device is often set in the environment of distributed cabinet air-conditioning, and the high-efficiency filter air supply port, High-efficiency filter fan air group, clean room, etc., constitute a purification air-conditioning system with distributed air supply.
To centrally purify the air-conditioning system to create a purification treatment method with the same cleanliness environment in the whole room, which is called whole-room purification. This is the earliest method developed in clean technology, and it is still used today. This method is suitable for places with tall process equipment, a large number of equipment, and the same indoor cleanliness, but this method requires large investment, complicated operation and management, and long construction period. With the local purification equipment for purifying air conditioners, such as clean workbenches, laminar flow hoods, grid vertical laminar flow units, etc., the purification treatment method that causes a certain cleanliness level environment in a local area in a general air conditioning environment is called local purification; The method is suitable for places where the production batch is small or the original workshop is used for technological transformation. The most widely used purification treatment method is the combination of whole room purification and local purification, which can not only ensure a certain degree of cleanliness in the room, but also achieve a high cleanliness environment in local areas, so as to meet the production requirements for high cleanliness environment. The dual purpose of energy saving and energy saving; the operation section that requires 100-level cleanliness, when the production batch is small, as long as the clean bench or laminar flow hood and other local purification equipment are used in the turbulent clean room with low cleanliness, It can realize the purification method combining whole clean room modular purification and local purification. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for clean rooms and clean rooms.
The sterile room is a special room for inoculation or aseptic experiments. The room requires a certain level of cleanliness. At present, the sterile room of pharmaceutical factories generally adopts the cleanliness level of 10,000, and some use the cleanliness of 100,000, but all require An ultra-clean workbench is placed in the sterile room, and the cleanliness level of 100 is required on this table; the floor height of the sterile room is generally 2.2-2.5m, and the operator should be able to stand on the stool and wipe it with gauze stained with sterilizing liquid Wipe the walls and ceilings, the walls of the sterile room should be made of smooth materials, the corners should be made into arcs, and the walls and floors should generally be coated with epoxy resin or PVC; a technical interlayer should be set up on the ceiling, and pipes such as ventilation and wires should be arranged; no The bacteria room layout should reasonably arrange personnel purification and item purification channels to avoid cross-contamination.
SUZHOU PHARMA MACHINERY CO.,LTD. is experienced in producing extraction machine CUSTOM SOLUTION SERVICES products featuring topnotch quality with ODM services available. Welcome to visit our site at PHARMA MACHINERY.
If you are interested in , click PHARMA MACHINERY to see some items with features that you will be amazed at.
As consumers get more and better information regarding how to compare various products and companies, it is critical to compete on the price and value of CUSTOM SOLUTION SERVICES.
PHARMA is one of the top brands in their class when it comes to CUSTOM SOLUTION SERVICES and extraction machine. If you check online, PHARMA is often rated high and reviewed with much praise. we would be very pleased to receive your inquiry.