Clean room of clean workshop for the production of water-based cosmetics
Clean room of clean pharmaceutical cleanroom for the production of water-based cosmetics
Water-based cosmetics mainly include perfume and lotion products, which are mainly transparent liquids based on ethanol solution. Such products must be transparent, the aroma should be pure and free of miscellaneous odors, and turbidity and precipitation should not occur even at low temperatures. The raw materials and packaging used for such products...
Text label: Clean room for water cosmetic production, decoration and construction of clean room
Water-based cosmetics production clean room purification room
Water-based cosmetics mainly include perfume and lotion products, which are mainly transparent liquids based on ethanol solution. Such products must be transparent, the aroma should be pure and free of miscellaneous odors, and turbidity and precipitation should not occur even at low temperatures. The requirements for the raw materials, packaging containers and equipment used in such products are very high, especially ethanol for perfume, which is not allowed to contain trace impurities, otherwise the fragrance of the perfume will be seriously damaged. ; Fresh distilled water or deionized water should be used for the preparation of perfume cosmetics. Microorganisms are not allowed in the water. Iron and copper materials should be avoided for production equipment, pipes and containers, and stainless steel products should be used.
The prepared perfume should be aged at least 1-3 months at low temperature. If some insoluble substances are precipitated during the aging period, they should be filtered and removed to ensure that the perfume is transparent and clear. During the aging period, the aroma of the perfume gradually changes from Rough transformation into mellow, if the fragrance is not properly formulated, it may produce less than ideal changes, which take 6 months to 1 year to achieve the aging effect. The quality of products such as perfume, cologne and toilet water must always be clear and transparent, with stable color tone and aroma. Shortly after manufacture or after a period of aging, observe and measure the product's appearance and transparency, measure its relative density with a hydrometer, and use physical methods. Or chemical method to determine ethanol content. The preparation work before the production of lotion is the same as that of perfume. First, dissolve glycerin and propylene glycol as representative moisturizing agents and other water-soluble ingredients in purified water, and then dissolve preservatives, perfumes, and solubilizers in ethanol to indicate active agents and other alcohols. For soluble ingredients, the alcohol system is mixed with the water system, solubilized and dissolved, and then dyed and filtered to remove dust and insoluble substances to obtain a clarified lotion; for lotions with more solubilized substances such as spices and oils, Using a filter aid that does not affect the ingredients can completely remove insoluble substances. The more commonly used lotions include moisturizing lotions and soft lotions. Zhongjing Global Purification provides consulting, planning, design, construction, installation, transformation and other supporting services for cosmetic workshops and dust-free workshops.
The moisturizing lotion has both decontamination and softening functions. The main ingredients of detergents are non-ionic surfactants and amphoteric surfactants. Moisturizers such as glycerin and propylene glycol are added to help descale and absorb moisture in the air. , make the skin soft. Astringent lotion is used to reduce the oil content of the skin, shrink pores, and prevent rough skin. Astringent cosmetics are divided into chemical astringent type and physical astringency type. It has a convergence effect, and the latter's convergence effect is caused by physical effects.
At a time when technology is essential for CUSTOM SOLUTION SERVICES, ensuring that it works in a symbiotic way with your human employees is key.
Make your extraction machine extraction machine. Invest in professional CUSTOM SOLUTION SERVICES services. For more info, check out PHARMA MACHINERY.
We want to be careful and deliberate about developing PHARMA, from the platform we choose, to the way we approach it, to the methods we use.
In clean area management and quality control, laminar flow interference testing has received much attention, and whether it is only applicable to Class A laminar flow remains to be considered.