Clean Room Installation
Today, more attention is paid to the cleaning and sterilization packaging of industrial products. With the wide application of clean room products in the world, many customers prefer or can only choose to hire engineers locally to install clean rooms. In order to facilitate our customers to better complete the installation and commissioning of the clean room project, we will make detailed clean room installation drawings, videos, and provide 24-hour online installation guidance services.
In the video, we can see that the wall panels of the clean room are fixed on the ground through a U-shaped aluminum alloy profile, and then each wall panel is fixed and connected in the vertical direction by using a cross shaped aluminum profile or the protrusion of the plate itself. L-shaped aluminum profiles are used for the connection and fixation of the top plate and the wall panel, and the connection of two 90 degree wall panels in some parts.
The outer arc aluminum profile is used to seal the bottom and top contact parts of the wallboard. There is usually a gap there. We can use the outer arc and sealant to complete the sealing of the room to ensure that the external air and dust will not leak from any part of the wall. In this way, we can ensure that the inside of the clean room is sealed and clean
The installation of the clean room needs to start with the cleaning of the ground as the first step, and then mark the position of each wall,
The ventilation duct can be installed after the position of the wall panel is marked, or it can be installed once after the installation of the top plate of the clean room is completed.
We can also provide detailed 3D animation installation videos. Engineers can complete the whole clean room project quickly and with high quality only by performing each step of installation according to the animation.
We hope that with our efforts, more and more friends can use our clean room to complete the production of their industrial products
Suzhou Pharma Machinery Co.,Ltd.
2022/08/24
Gino
