Clean laboratory equipment and instrument layout
Clean laboratory equipment and instrument layout
The common test benches in laboratories include island or peninsula central test benches and side test benches. It is not advisable to arrange side test benches against the outer wall with windows. When arranged in parallel with the outer window, the clear distance between it and the outer wall should not be less than 1...
Text label: clean laboratory equipment, purification equipment layout and installation
Clean laboratory equipment and instrument layout
The common test benches in laboratories include island or peninsula central test benches and side test benches. It is not advisable to arrange side test benches against the outer wall with windows. When arranged in parallel with the external window, the clear distance between it and the external wall shall not be less than 1.3m. The minimum net width of the single-sided room in the corridor should not be less than 1.3m, and the minimum net width of the double-sided room with a single aisle should not be less than 1.6m. When there is a height difference on the floor of the corridor, when the height difference is less than two steps, no steps should be set. The slope of the ramp should not be greater than 1:8. The design of the stairs must comply with the architectural design specifications. For the frequently used stairs, the step width should not be less than 0.28m and the height should not be greater than 0.17m. Elevators should be installed in scientific experimental buildings with four or more floors. Conventional laboratories and research studios should be conducive to natural lighting. The ratio of window to floor area should not be less than 1:6, and the ratio of window to floor area of u200bu200breading rooms using natural lighting should not be less than 1:5. The scientific experimental building should be equipped with changing rooms, and the usable area of u200bu200beach person should not be less than 0.6m2, and should be equipped with lockers and shoe changing cabinets, which can be arranged in a centralized, decentralized or a combination of the two.
The allowable noise level of conventional laboratories should not be greater than 55dB, the allowable noise level of research studios and reading rooms should not be greater than 50dB, and public facilities that generate noise should not be adjacent to laboratories, research studios and reading rooms. Take sound insulation and noise reduction measures. Vibration-producing public facilities and other rooms should not be adjacent to laboratories, research studios and reading rooms, and should be located on the ground floor or basement. Exhaust fan room, etc., and its equipment foundation should take vibration isolation measures. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for clean laboratories and sterile rooms.
Lab furniture is different from office furniture. Its use is often in contact with water, electricity, gas, chemical substances and instruments and equipment. Therefore, higher requirements are placed on the structure and material of furniture. During pharma machinery construction, it must be According to the work content, environmental conditions and specific requirements of the pharma machinery, furniture design and selection are carried out. The layout, function and flexibility design of laboratory furniture are one of the important components of experimental architectural design. furniture is divided into wooden structure, steel-wood structure and all-steel structure according to different materials. Wooden furniture is mainly wood-based panel, rich in color and strong in personalization. It is suitable for users who pursue individuality, but its moisture resistance and bearing capacity are slightly lower. Weak, not suitable for humid laboratories and environments with high load-bearing requirements; steel-wood structure furniture is composed of metal frame and wooden cabinet. The test bench can be equipped with movable lower cabinet or fixed cabinet, which is cost-effective, but has a single style. It is suitable for users who pursue economic benefits; steel furniture is made of cold-rolled steel plate after pickling and baked with epoxy resin on the surface. It has good load-bearing performance, strong durability and strong comprehensive performance. It is suitable for users with sufficient budget and high requirements. Experiment benches can be divided into fixed experiment benches, suspended experiment benches, split experiment benches and mobile experiment benches according to different structural forms. The mobile lab bench is on wheels, giving users some flexibility to create and transform their own lab space, objects on the mobile bench can be easily moved from one place to another, many tables, carts and workbenches The height of the object can be adjusted vertically to be more ergonomic; the initial cost of the mobile test bench is higher than that of the fixed test bench. If the fixed workbench and the mobile workbench are combined according to the experimental needs, the cost can be reduced and the flexibility can be maintained.
SUZHOU PHARMA MACHINERY CO.,LTD. highlighted the need to foster a human openness to technological innovation.
SUZHOU PHARMA MACHINERY CO.,LTD. seeks to lead the industry by instilling pride in our customers, creating value for the market and sharing responsibility around the world.
SUZHOU PHARMA MACHINERY CO.,LTD. will need to find one that fits our needs and budgets, and still turns out a quality product.
To stay in contact for latest review of CUSTOM SOLUTION SERVICES extraction machine across the globe and find out quality products, just go to PHARMA MACHINERY.