Application and future development prospect of tablet press in jewelry processing industry

After decades of development, the tablet press has developed from a single manual metal to a multi-functional automatic tablet press. There are also various types and types of metals, and the precision of pressing is getting higher and higher. For example, the 5.5P, 7.5P, 10P, 12P, 20P, 30P, and 50P metals we develop and produce can meet the tableting needs of various industries and materials. In terms of precision, it can also fully reach the range of 0.5mm~0.01mm according to the needs of customers. In this era of advanced technology, as long as customers have needs for metal pressing, chip machine manufacturers can always have various channels to solve customer needs. Without further ado, tablet presses are widely used in the jewelry industry. Such as some gold, silver, copper, karat gold, alloys, etc. , before making all kinds of jewelry, metal is essential. For example, some time ago, a customer of a jewelry manufacturer found us on the Internet and asked if a 22 mm thick gold nugget could be precision pressed to 0.3 mm. Our answer must be yes. And it's not difficult to implement. The specific process of tablet compression can be taken out and shared with you. In response to the needs of jewelry customers, Baofeng first recommended 12P metal to the customer. Firstly, the 22mm gold nugget was controlled within the range of 0.5mm through multiple rough pressing, and then it was gradually fine-pressed to within the range of 0.3mm through a 7.5P low-power compressor. Finally achieve the desired effect of the customer. Now the machines and equipment developed by many film manufacturers have reached the level of being very intelligent, simple and easy to use, and customers do not need to have much theoretical knowledge when using metal products. It only needs simple drills by technicians, and customers can basically start by themselves and do really silly operations.