INFO CENTER

Tdp-1.5 Tdp5 Refueling Position And Times

Model: tdp-1.5 tdp-5 Maximum tablet pressing pressure: 15kn 50kN

Tdp-1.5 Tdp5 Refueling Position And Times

Unstable Tablet Weight Of Common Faults Of Single Tablet Press Machine-11

Many customers will encounter the problem of large difference in the weight of extruded tablets during use. Here we will analyze the causes of the whole problem and solutions.

Unstable Tablet Weight Of Common Faults Of Single Tablet Press Machine-11

Rough Edged Tablets, Cracked Tablets And Tablets Are Not Smooth Of Common Faults Of Tablet Press-9

In the process of using the tablet press, some users will report that the pressed tablets have rough edges and cracked tablets, and the tablets are not only. Today, I will introduce to you the solution to the problem of rough edge tablets and cracked tablets in the use of tablet press

Rough Edged Tablets, Cracked Tablets And Tablets Are Not Smooth Of Common Faults Of Tablet Press-9

Chip Jumping And Fragmentation Of Common Faults Of Tablet Press-8

8. chip jumping and debris Fault condition: The tablet is too bouncing or broken when it is knocked out

Chip Jumping And Fragmentation Of Common Faults Of Tablet Press-8

Overlapping Tablet Of Common Faults Of Single Tablet Press Machine-7

7. Overlapping tablet Fault condition: Two times of feeding and pressing into one piece Cause of failure: When the tablets are adjusted, they are not ejected and the hand wheel is reversed to make the feeder feed repeatedly, resulting in overlapping tablets. Fault prevention and treatment:

Overlapping Tablet Of Common Faults Of Single Tablet Press Machine-7

Difficulty Of Disassembling The Mold Of Common Faults Of Single Tablet Press Machine

In the process of using the tablet press, some small problems will inevitably appear. Many people will encounter the difficulty of disassembling the mold, which is one of them. Today, I will introduce the common problems of tablet press in use, the difficulty of disassembling the mold and how to solve these problems

Difficulty Of Disassembling The Mold Of Common Faults Of Single Tablet Press Machine

Feeder damage of common faults of single tablet press machine-5

5. The feeder is damaged 1.Fault condition: Collide with undershoot Cause of failure:

Feeder damage of common faults of single tablet press machine-5

Common Faults Of Single Tablet Press Machine -4

4. Wear A) Fault condition: The friction surface between the spindle and the hole is rapidly worn and even burned out

Common Faults Of Single Tablet Press Machine -4

Common Faults Of Single Tablet Press Machine -Vibration

During the operation of the tablet press, there will inevitably be some small accidents, and vibration is one of them. Today, I will introduce the common fault of the tablet press in the use of the machine vibration problem, and how to solve it when you encounter such a problem

Common Faults Of Single Tablet Press Machine -Vibration

Lubrication And Maintenance Method Of Tablet Press

In the pharmaceutical industry, single punch tablet machine can be said to be an essential processing equipment, which is usually used to suppress all kinds of traditional Chinese medicine tablets, western medicine tablets and so on.

Lubrication And Maintenance Method Of Tablet Press

Common Faults Of Single Punch Tablet Machine - Machine Not Running Well

2. machine not running well Fault condition: Generally, it doesn't work well Cause of failure:

Common Faults Of Single Punch Tablet Machine - Machine Not Running Well

Common Faults Of Single Punch Tablet Machine - Jacking

1. Jacking Fault condition: After the upper punch enters the middle die, the machine stops running Cause of failure:

Common Faults Of Single Punch Tablet Machine - Jacking

Fan Filter Unit Working Method

Detection of indoor airflow pattern 1. Layout of measuring points: The vertical unidirectional flow (laminar flow) clean room shall have one longitudinal section and one transverse section respectively

Fan Filter Unit Working Method

Test Method For Comprehensive Performance Of Clean Room

1、 Filter leak detection For the high-efficiency filter installed at the end of air supply and exhaust, the scanning method shall be used for filter installation frame and full section leakage detection. There are two scanning methods: leak detector method (photometer method) and particle counter method with a minimum sampling amount of 1l / min. For ultra-high efficiency filter, there are two scanning methods: condensation nodule counter method and laser particle counter method.

Test Method For Comprehensive Performance Of Clean Room

Suzhou Pharma Launch a Nationwide Fitness Campaign

In order to make all “SUZHOU PHARMA PERSON” healthier and more energetic, Suzhou Pharma started its first fitness course today.

Suzhou Pharma Launch a Nationwide Fitness Campaign

FAQ-What's The Use Of The Air Shower Room?

Air shower is a kind of universal local purification equipment in which people or goods enter the clean area and the fan sprays the highly filtered clean strong wind through the air shower nozzle to blow away the dust adsorbed on the surface of people or objects.

FAQ-What's The Use Of The Air Shower Room?

Better Touch Better Business

Contact Sales at PHARMA.

CONTACT US

86-18241958031

Copyright © 2024 SUZHOU CO.,LTD. | All Rights Reserved

Chat Online

Chat Online

Leave Your Message inputting...

We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist

* Name

* Phone

* E-mail

* Content